Utilizing run-out measurements in developing the production of large welded tube rolls

Tuukka Mustapaa; Raine Viitala; Petri Kuosmanen

doi:10.1109/I2MTC.2019.8827023

Utilizing run-out measurements in developing the production of large welded tube rolls

Tuukka Mustapaa, Raine Viitala, Petri Kuosmanen

Energia- ja konetekniikan laitos

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

Abstrakti

Roll bent or pressed longitudinally welded tube rolls are commonly used as cable drums of large lifting systems. In the present study, a run-out measurement based system was developed for optimizing the roll alignment for turning and for calculating an estimation of the unbalance of the rolls after turning. The intended benefits of the system are the reduction of the manufacturing costs and the overall improvements in end product quality. In addition, the data gathered can be analysed to improve the preceding manufacturing processes. The accuracy of the alignment was analysed by measuring run-out profiles before turning and the wall thickness variation of the test specimens after turning. The accuracy of the estimated static balancing was verified with a balancing machine.

Alkuperäiskieli	Englanti
Otsikko	I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings
Kustantaja	IEEE
Sivumäärä	6
ISBN (elektroninen)	9781538634608
DOI - pysyväislinkit	https://doi.org/10.1109/I2MTC.2019.8827023
Tila	Julkaistu - 9 syysk. 2019
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IEEE International Instrumentation and Measurement Technology Conference - Auckland, Uusi-Seelanti Kesto: 20 toukok. 2019 → 23 toukok. 2019 Konferenssinumero: 12

Julkaisusarja

Nimi	Conference Record - IEEE Instrumentation and Measurement Technology Conference
Vuosikerta	2019-May
ISSN (painettu)	1091-5281

Conference

Conference	IEEE International Instrumentation and Measurement Technology Conference
Lyhennettä	MTC
Maa/Alue	Uusi-Seelanti
Kaupunki	Auckland
Ajanjakso	20/05/2019 → 23/05/2019

Pääsy asiakirjaan

10.1109/I2MTC.2019.8827023

Muut tiedostot ja linkit

Link to publication in Scopus

Roottorisysteemin digitaalinen kaksonen
Kuosmanen, P. (Vastuullinen tutkija), Viitala, R. (Projektin jäsen), Widmaier, T. (Projektin jäsen), Mustapää, T. (Projektin jäsen) & Viitala, R. (Projektin jäsen)
01/01/2018 → 31/12/2019
Projekti: Academy of Finland: Other research funding

Siteeraa tätä

Mustapaa, T., Viitala, R., & Kuosmanen, P. (2019). Utilizing run-out measurements in developing the production of large welded tube rolls. teoksessa I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings Artikkeli 8827023 (Conference Record - IEEE Instrumentation and Measurement Technology Conference; Vuosikerta 2019-May). IEEE. https://doi.org/10.1109/I2MTC.2019.8827023

@inproceedings{4832eeba02b74473bf19b6017d00c1fa,

title = "Utilizing run-out measurements in developing the production of large welded tube rolls",

abstract = "Roll bent or pressed longitudinally welded tube rolls are commonly used as cable drums of large lifting systems. In the present study, a run-out measurement based system was developed for optimizing the roll alignment for turning and for calculating an estimation of the unbalance of the rolls after turning. The intended benefits of the system are the reduction of the manufacturing costs and the overall improvements in end product quality. In addition, the data gathered can be analysed to improve the preceding manufacturing processes. The accuracy of the alignment was analysed by measuring run-out profiles before turning and the wall thickness variation of the test specimens after turning. The accuracy of the estimated static balancing was verified with a balancing machine.",

keywords = "Cable drum, Lifting system, Rotor balancing, Run-out, Static unbalance, Turning",

author = "Tuukka Mustapaa and Raine Viitala and Petri Kuosmanen",

year = "2019",

month = sep,

day = "9",

doi = "10.1109/I2MTC.2019.8827023",

language = "English",

series = "Conference Record - IEEE Instrumentation and Measurement Technology Conference",

publisher = "IEEE",

booktitle = "I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings",

address = "United States",

note = "IEEE International Instrumentation and Measurement Technology Conference, MTC ; Conference date: 20-05-2019 Through 23-05-2019",

}

Mustapaa, T, Viitala, R & Kuosmanen, P 2019, Utilizing run-out measurements in developing the production of large welded tube rolls. julkaisussa I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings., 8827023, Conference Record - IEEE Instrumentation and Measurement Technology Conference, Vuosikerta 2019-May, IEEE, IEEE International Instrumentation and Measurement Technology Conference, Auckland, Uusi-Seelanti, 20/05/2019. https://doi.org/10.1109/I2MTC.2019.8827023

Utilizing run-out measurements in developing the production of large welded tube rolls. / Mustapaa, Tuukka; Viitala, Raine ; Kuosmanen, Petri.
I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE, 2019. 8827023 (Conference Record - IEEE Instrumentation and Measurement Technology Conference; Vuosikerta 2019-May).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Utilizing run-out measurements in developing the production of large welded tube rolls

AU - Mustapaa, Tuukka

AU - Viitala, Raine

AU - Kuosmanen, Petri

N1 - Conference code: 12

PY - 2019/9/9

Y1 - 2019/9/9

N2 - Roll bent or pressed longitudinally welded tube rolls are commonly used as cable drums of large lifting systems. In the present study, a run-out measurement based system was developed for optimizing the roll alignment for turning and for calculating an estimation of the unbalance of the rolls after turning. The intended benefits of the system are the reduction of the manufacturing costs and the overall improvements in end product quality. In addition, the data gathered can be analysed to improve the preceding manufacturing processes. The accuracy of the alignment was analysed by measuring run-out profiles before turning and the wall thickness variation of the test specimens after turning. The accuracy of the estimated static balancing was verified with a balancing machine.

AB - Roll bent or pressed longitudinally welded tube rolls are commonly used as cable drums of large lifting systems. In the present study, a run-out measurement based system was developed for optimizing the roll alignment for turning and for calculating an estimation of the unbalance of the rolls after turning. The intended benefits of the system are the reduction of the manufacturing costs and the overall improvements in end product quality. In addition, the data gathered can be analysed to improve the preceding manufacturing processes. The accuracy of the alignment was analysed by measuring run-out profiles before turning and the wall thickness variation of the test specimens after turning. The accuracy of the estimated static balancing was verified with a balancing machine.

KW - Cable drum

KW - Lifting system

KW - Rotor balancing

KW - Run-out

KW - Static unbalance

KW - Turning

UR - http://www.scopus.com/inward/record.url?scp=85072823541&partnerID=8YFLogxK

U2 - 10.1109/I2MTC.2019.8827023

DO - 10.1109/I2MTC.2019.8827023

M3 - Conference article in proceedings

AN - SCOPUS:85072823541

T3 - Conference Record - IEEE Instrumentation and Measurement Technology Conference

BT - I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings

PB - IEEE

T2 - IEEE International Instrumentation and Measurement Technology Conference

Y2 - 20 May 2019 through 23 May 2019

ER -

Mustapaa T, Viitala R , Kuosmanen P. Utilizing run-out measurements in developing the production of large welded tube rolls. julkaisussa I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE. 2019. 8827023. (Conference Record - IEEE Instrumentation and Measurement Technology Conference). doi: 10.1109/I2MTC.2019.8827023

Utilizing run-out measurements in developing the production of large welded tube rolls

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

Roottorisysteemin digitaalinen kaksonen

Siteeraa tätä