Two-Stage Attenuation Filter for Artificial Reverberation

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

9 Lataukset (Pure)

Abstrakti

Delay networks are a common parametric method to synthesize the late part of the room reverberation. A delay network consists of several feedback loops, each containing a delay line and an attenuation filter, which approximates the same decay rate by appropriately setting the frequency-dependent loop gain. A remaining challenge is the design of the attenuation filters on a wide frequency range based on a measured room impulse response. This letter proposes a novel two-stage attenuation filter structure, sharpening the design. The first stage is a low-order pre-filter approximating the overall shape and determining the decay at the two ends of the frequency range, namely at the dc and the Nyquist limit. The second filter, an equalizer, fine-tunes the gain at different frequencies, such as on one-third-octave bands. It is shown that the proposed design is more accurate and robust than previous methods. A design example applying the proposed method to an interleaved velvet-noise reverberator is also exhibited. The proposed two-stage attenuation filter is a step toward a realistic parametric simulation of measured room impulse responses.

AlkuperäiskieliEnglanti
Sivut391-395
Sivumäärä5
JulkaisuIEEE Signal Processing Letters
Vuosikerta31
DOI - pysyväislinkit
TilaJulkaistu - 10 tammik. 2024
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Two-Stage Attenuation Filter for Artificial Reverberation'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä