Thermographic method for measuring iron losses and localized loss density

Osaruyi Osemwinyen, Sahas Bikram Shah, Antero Arkkio

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientificvertaisarvioitu

106 Lataukset (Pure)

Abstrakti

The knowledge of core losses in electrical machine is required for the successful design of highly efficient machines. This paper presents a thermographic technique for measuring core loss and localize loss density in an electrical machine. First, a 3D numerical solution of the stated problem was carried out in COMSOL multi-physics to study the possibility of the measurement technique. The experimental measurement process was demonstrated on a 24/12 V single-phase transformer. The excitation was supplied to the transformer by varying the applied voltage at a constant frequency of 300 Hz. IR camera was used to obtain the images of the core at the instant of supply for three different flux densities. The core losses were estimated from the initial rate of temperature rise and compared with the core loss obtained directly from the wattmeter. The results show that the developed system can accurately estimate core loss density and distribution over a wide range, with an error margin of less than 6%. However, the accuracy of the results obtained is affected by measurement condition.

AlkuperäiskieliEnglanti
OtsikkoProceedings of the 7th International Electric Drives Production Conference, EDPC 2017
KustantajaIEEE
Sivut28-31
Sivumäärä4
Vuosikerta2017-December
ISBN (elektroninen)9781538610695
DOI - pysyväislinkit
TilaJulkaistu - 29 maaliskuuta 2018
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaInternational Electric Drives Production Conference - Wurzburg, Saksa
Kesto: 5 joulukuuta 20176 joulukuuta 2017
Konferenssinumero: 7

Julkaisusarja

NimiInternational Electric Drives Production Conference
ISSN (painettu)2331-5644

Conference

ConferenceInternational Electric Drives Production Conference
LyhennettäEDPC
MaaSaksa
KaupunkiWurzburg
Ajanjakso05/12/201706/12/2017

Sormenjälki Sukella tutkimusaiheisiin 'Thermographic method for measuring iron losses and localized loss density'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

  • Projektit

    • 1 Päättynyt

    ALEM: Additional Losses in Electrical Machines

    Lehikoinen, A., Belahcen, A., Upadhaya, B., Osemwinyen, O., Sundaria, R., Aydin, U., Balasubramanian, A., Arkkio, A., Rasilo, P., Razzaq, M., Nair, D., Shah, S., Hemeida, A. & Rouhi, H.

    01/03/201431/05/2019

    Projekti: EU: ERC grants

    Siteeraa tätä

    Osemwinyen, O., Shah, S. B., & Arkkio, A. (2018). Thermographic method for measuring iron losses and localized loss density. teoksessa Proceedings of the 7th International Electric Drives Production Conference, EDPC 2017 (Vuosikerta 2017-December, Sivut 28-31). [8328145] (International Electric Drives Production Conference). IEEE. https://doi.org/10.1109/EDPC.2017.8328145