The near infrared imaging system for the real-time protection of the JET ITER-like wall

Tutkimustuotos: Lehtiartikkelivertaisarvioitu


  • JET Contributors


  • EURATOM CCFE Fus Assoc, Euratom, Culham Sci Ctr
  • ERM KMS, Lab Plasma Phys
  • Univ Lisbon, Universidade de Lisboa, Inst Super Tecn, Inst Plasmas & Fusao Nucl
  • Culham Sci Ctr, JET Exploitat Unit
  • Universidade de São Paulo
  • Forschungszentrum Jülich
  • Forschungszentrum Julich, Julich Research Center, Inst Energie & Klimaforsch Plasmaphys, Partner Trilateral Euregio Cluster TEC


This paper describes the design, implementation and operation of the near infrared (NIR) imaging diagnostic system of the JET ITER-like wall (JET-ILW) plasma experiment and its integration into the existing JET protection architecture. The imaging system comprises four wide-angle views, four tangential divertor views, and two top views of the divertor covering 66% of the first wall and up to 43% of the divertor. The operation temperature ranges which must be observed by the NIR protection cameras are, for the materials used on JET: Be 700 degrees C-1400 degrees C; W coating 700 degrees C-1370 degrees C; W bulk 700 degrees C-1400 degrees C. The Real-Time Protection system operates routinely since 2011 and successfully demonstrated its capability to avoid the overheating of the main chamber beryllium wall as well as of the divertor W and W-coated carbon fibre composite (CFC) tiles. During this period, less than 0.5% of the terminated discharges were aborted by a malfunction of the system. About 2%-3% of the discharges were terminated due to the detection of actual hot spots.


JulkaisuPhysica Scripta
TilaJulkaistu - joulukuuta 2017
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu
TapahtumaInternational Conference on Plasma-Facing Materials and Components for Fusion Applications - Düsseldorf, Saksa
Kesto: 16 toukokuuta 201719 toukokuuta 2017
Konferenssinumero: 16

ID: 16962327