The influence of PVD coatings on the wear performance of steel dental curettes

Jarmo Leppäniemi; Jussi Lyytinen; Oskari Elomaa; Kimmo Suomalainen; Jari Koskinen

doi:10.4028/www.scientific.net/KEM.674.289

The influence of PVD coatings on the wear performance of steel dental curettes

Jarmo Leppäniemi
, Jussi Lyytinen
, Oskari Elomaa
, Kimmo Suomalainen
, Jari Koskinen

Kemian ja materiaalitieteen laitos

Tampere University Hospital
Tampere University

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

1 Sitaatiot (Scopus)

Abstrakti

The wear properties of steel dental curettes coated with wear resistant Diamond Like Carbon (DLC) and metal nitride coatings deposited by Physical Vapor Deposition (PVD) were studied by using a customized mechanical device simulating motion and load of dental curettes against human teeth. The wear surfaces were studied by optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and Nanoindentation. Rockwell indentation testing was used to evaluate the coating adhesion. With the optimized combination of substrate steel and wear resistant coating reduction of 82% in the wear of instruments could be achieved.

Alkuperäiskieli	Englanti
Otsikko	Engineering Materials and Tribology
Alaotsikko	Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology
Kustantaja	Trans Tech Publications
Sivut	289-295
Sivumäärä	7
Vuosikerta	674
ISBN (painettu)	9783038356554
DOI - pysyväislinkit	https://doi.org/10.4028/www.scientific.net/KEM.674.289
Tila	Julkaistu - 2016
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Baltic Conference on Engineering Materials and Tribology - Tallinn, Viro Kesto: 5 marrask. 2015 → 6 marrask. 2015 Konferenssinumero: 24

Julkaisusarja

Nimi	Key Engineering Materials
Vuosikerta	674
ISSN (painettu)	1013-9826

Conference

Conference	International Baltic Conference on Engineering Materials and Tribology
Lyhennettä	BALTMATTRIB
Maa/Alue	Viro
Kaupunki	Tallinn
Ajanjakso	05/11/2015 → 06/11/2015

Pääsy asiakirjaan

10.4028/www.scientific.net/KEM.674.289

Muut tiedostot ja linkit

Link to publication in Scopus

Raaka-aineiden tutkimusinfrastruktuuri
Karppinen, M. (Manager)
Kemian tekniikan korkeakoulu
Laitteistot/tilat: Facility

Siteeraa tätä

Leppäniemi, J., Lyytinen, J., Elomaa, O., Suomalainen, K., & Koskinen, J. (2016). The influence of PVD coatings on the wear performance of steel dental curettes. teoksessa Engineering Materials and Tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (Vuosikerta 674, Sivut 289-295). (Key Engineering Materials; Vuosikerta 674). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/KEM.674.289

Leppäniemi, Jarmo ; Lyytinen, Jussi ; Elomaa, Oskari et al. / The influence of PVD coatings on the wear performance of steel dental curettes. Engineering Materials and Tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology. Vuosikerta 674 Trans Tech Publications, 2016. Sivut 289-295 (Key Engineering Materials).

@inproceedings{03c76c98d21545ca9d70a6b0bf1168b8,

title = "The influence of PVD coatings on the wear performance of steel dental curettes",

abstract = "The wear properties of steel dental curettes coated with wear resistant Diamond Like Carbon (DLC) and metal nitride coatings deposited by Physical Vapor Deposition (PVD) were studied by using a customized mechanical device simulating motion and load of dental curettes against human teeth. The wear surfaces were studied by optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and Nanoindentation. Rockwell indentation testing was used to evaluate the coating adhesion. With the optimized combination of substrate steel and wear resistant coating reduction of 82\% in the wear of instruments could be achieved.",

keywords = "Abrasive wear, curette, cutting edge, dental, instrument, PVD, thin film",

author = "Jarmo Lepp{\"a}niemi and Jussi Lyytinen and Oskari Elomaa and Kimmo Suomalainen and Jari Koskinen",

year = "2016",

doi = "10.4028/www.scientific.net/KEM.674.289",

language = "English",

isbn = "9783038356554",

volume = "674",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications",

pages = "289--295",

booktitle = "Engineering Materials and Tribology",

address = "Switzerland",

note = "International Baltic Conference on Engineering Materials and Tribology, BALTMATTRIB ; Conference date: 05-11-2015 Through 06-11-2015",

}

Leppäniemi, J, Lyytinen, J, Elomaa, O, Suomalainen, K & Koskinen, J 2016, The influence of PVD coatings on the wear performance of steel dental curettes. julkaisussa Engineering Materials and Tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology. Vuosikerta 674, Key Engineering Materials, Vuosikerta 674, Trans Tech Publications, Sivut 289-295, International Baltic Conference on Engineering Materials and Tribology, Tallinn, Viro, 05/11/2015. https://doi.org/10.4028/www.scientific.net/KEM.674.289

The influence of PVD coatings on the wear performance of steel dental curettes. / Leppäniemi, Jarmo; Lyytinen, Jussi; Elomaa, Oskari et al.
Engineering Materials and Tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology. Vuosikerta 674 Trans Tech Publications, 2016. s. 289-295 (Key Engineering Materials; Vuosikerta 674).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - The influence of PVD coatings on the wear performance of steel dental curettes

AU - Leppäniemi, Jarmo

AU - Lyytinen, Jussi

AU - Elomaa, Oskari

AU - Suomalainen, Kimmo

AU - Koskinen, Jari

N1 - Conference code: 24

PY - 2016

Y1 - 2016

N2 - The wear properties of steel dental curettes coated with wear resistant Diamond Like Carbon (DLC) and metal nitride coatings deposited by Physical Vapor Deposition (PVD) were studied by using a customized mechanical device simulating motion and load of dental curettes against human teeth. The wear surfaces were studied by optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and Nanoindentation. Rockwell indentation testing was used to evaluate the coating adhesion. With the optimized combination of substrate steel and wear resistant coating reduction of 82% in the wear of instruments could be achieved.

AB - The wear properties of steel dental curettes coated with wear resistant Diamond Like Carbon (DLC) and metal nitride coatings deposited by Physical Vapor Deposition (PVD) were studied by using a customized mechanical device simulating motion and load of dental curettes against human teeth. The wear surfaces were studied by optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and Nanoindentation. Rockwell indentation testing was used to evaluate the coating adhesion. With the optimized combination of substrate steel and wear resistant coating reduction of 82% in the wear of instruments could be achieved.

KW - Abrasive wear

KW - curette

KW - cutting edge

KW - dental

KW - instrument

KW - PVD

KW - thin film

UR - https://www.scopus.com/pages/publications/84958230840

U2 - 10.4028/www.scientific.net/KEM.674.289

DO - 10.4028/www.scientific.net/KEM.674.289

M3 - Conference article in proceedings

AN - SCOPUS:84958230840

SN - 9783038356554

VL - 674

T3 - Key Engineering Materials

SP - 289

EP - 295

BT - Engineering Materials and Tribology

PB - Trans Tech Publications

T2 - International Baltic Conference on Engineering Materials and Tribology

Y2 - 5 November 2015 through 6 November 2015

ER -

Leppäniemi J, Lyytinen J, Elomaa O, Suomalainen K, Koskinen J. The influence of PVD coatings on the wear performance of steel dental curettes. julkaisussa Engineering Materials and Tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology. Vuosikerta 674. Trans Tech Publications. 2016. s. 289-295. (Key Engineering Materials). doi: 10.4028/www.scientific.net/KEM.674.289

The influence of PVD coatings on the wear performance of steel dental curettes

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Laitteet

Raaka-aineiden tutkimusinfrastruktuuri

Siteeraa tätä