Superheated fuel sprays : A comparative study of flash boiling ammonia fuel sprays with methanol, ethanol, and gasoline for multi-hole fuel injection

Muhammad Saad Akram*, Qiang Cheng, Ossi Kaario, Martti Larmi

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

36 Lataukset (Pure)

Abstrakti

The rising energy demand creates a huge need to explore and implement sustainable alternative fuels e.g., ammonia, hydrogen, methanol, ethanol, etc. to mitigate emission challenges and significantly lower CO2 emissions. Ammonia has gained much attention as promising alternative fuels for internal combustion engines due to its carbon-neutral nature, which can reduce the carbon footprint in transportation. The advantages of ammonia as a fuel includes carbon-free nature, high volumetric energy density compared to hydrogen, and renewable resource-based production. However, there is lack of the deep understanding of the ammonia spray characteristics and fuel-air mixing process, in particular, the superheated spray, which potentially improve the vaporization and fuel-air mixing. This study focused on investigating the impact of superheating on ammonia, methanol, ethanol, and gasoline fuel sprays by heating the fuel injector tip from non-evaporating to flash boiling temperatures. The fundamental spray parameters were investigated in a constant volume spray chamber using a multihole solenoid driven injector for 150 bar constant injection pressure under 10 bar and 30 bar chamber pressure conditions. To observe flash boiling and the dual-phase flow, a Z-type Schlieren imaging technique, known for its sensitivity to density gradients, was used. The experimental results indicated that ammonia spray behavior significantly differed from other tested fuels for both under cold and superheated conditions. The effect of superheating on methanol, ethanol, and gasoline sprays was very similar, resulting in the shrinkage of spray width and the merging of adjacent plumes into a single thick cloud of spray for elevated tip temperatures. However, ammonia sprays exhibited considerable differences in evaporative conditions, developing a more significant dual phase flow than other fuels upon increment in tip temperature. Overall, the results showed that the spray tip penetration and area for all tested fuels reduced upon heating.

AlkuperäiskieliEnglanti
Artikkeli105110
Sivumäärä19
JulkaisuCase Studies in Thermal Engineering
Vuosikerta61
DOI - pysyväislinkit
TilaJulkaistu - syysk. 2024
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Superheated fuel sprays : A comparative study of flash boiling ammonia fuel sprays with methanol, ethanol, and gasoline for multi-hole fuel injection'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.
  • ZeroC: Carbon-Free Combustion with Ammonia and Hydrogen

    Kaario, O. (Vastuullinen tutkija), Akram, M. (Projektin jäsen), Ahmad, Z. (Projektin jäsen), Cheng, Q. (Projektin jäsen), Yeganeh, M. (Projektin jäsen) & Laitinen, A. (Projektin jäsen)

    01/05/202130/06/2023

    Projekti: Business Finland: Strategic centres for science, technology and innovation (SHOK)

Siteeraa tätä