Stress analysis and fatigue of welded structures

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

  • A. Chattopadhyay
  • G. Glinka
  • M. El-Zein
  • J. Qian
  • R. Formas

Organisaatiot

  • University of Waterloo
  • Aalto University
  • Deere

Kuvaus

Fatigue analyses of weldments require detailed knowledge of the stress fi elds in critical regions. The stress information is subsequently used for fi nding high local stresses where fatigue cracks may initiate and for calculating stress intensity factors and fatigue crack growth. The method proposed enables the determination of the stress concentration and the stress distribution in the weld toe region using a special shell fi nite element modelling technique. The procedure consists of a set of rules concerning the development of the fi nite element mesh necessary to capture the bending and membrane structural stresses. The structural stress data obtained from the shell fi nite element analysis and relevant stress concentration factors are subsequently used to determine the peak stress and the non-linear through-thickness stress distributions. The peak stress at the weld toe is subsequently used for the determination of fatigue crack initiation life. The stress distribution and the weight function method are used for the determination of stress intensity factors and for the analysis of subsequent fatigue crack growth.

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut2-21
Sivumäärä20
JulkaisuWelding in the World
Vuosikerta55
Numero7-8
TilaJulkaistu - heinäkuuta 2011
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

ID: 10394620