Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

Organisaatiot

Kuvaus

Strain accumulation was studied by digital image correlation technique (DIC) during microstructurally small fatigue crack propagation in polycrystalline 18%Cr ferritic stainless steel. Load-controlled fatigue testing was performed with R-ratio of 0.1 and frequency 10 Hz. The maximum applied stress was well below the yield stress of the studied material. The effect of the observed strain field on crack growth rate variation is discussed. Fracture surfaces were studied by scanning electron microscopy (SEM) evidencing the connection between the mechanism of the fatigue crack growth, accumulated strain and crack growth rate. Detailed study of fracture surface morphology was carried out by atomic force microscopy (AFM). Results indicate two processes of material damage accumulation and failure during cyclic loading: 1) local shear strain zones form successively ahead of the crack tip, and 2) fatigue crack growth occurs by both single- and multiple-slip mechanisms. The place and intensity of shear strain localization zones vary during the crack growth that is related closely to the local variation of crack growth rate.

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut51-59
Sivumäärä9
JulkaisuActa Materialia
Vuosikerta144
TilaJulkaistu - 1 helmikuuta 2018
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Lataa tilasto

Ei tietoja saatavilla

ID: 16042448