Robust selection of clean swept-sine measurements in non-stationary noise

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

6 Sitaatiot (Scopus)
70 Lataukset (Pure)

Abstrakti

The exponential sine sweep is a commonly used excitation signal in acoustic measurements, which, however, is susceptible to non-stationary noise. This paper shows how to detect contaminated sweep signals and select clean ones based on a procedure called the rule of two, which analyzes repeated sweep measurements. A high correlation between a pair of signals indicates that they are devoid of non-stationary noise. The detection threshold for the correlation is determined based on the energy of background noise and time variance. Not being disturbed by non-stationary events, a median-based method is suggested for reliable background noise energy estimation. The proposed method is shown to detect reliably 95% of impulsive noises and 75% of dropouts in the synthesized sweeps. Tested on a large set of measurements and compared with a previous method, the proposed method is shown to be more robust in detecting various non-stationary disturbances, improving the detection rate by 30 percentage points. The rule-of-two procedure increases the robustness of practical acoustic and audio measurements. (C) 2022 Author(s).All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY)license (http://creativecommons.org/licenses/by/4.0/).

AlkuperäiskieliEnglanti
Sivut2117-2126
Sivumäärä10
JulkaisuThe Journal of the Acoustical Society of America
Vuosikerta151
Numero3
DOI - pysyväislinkit
TilaJulkaistu - 1 maalisk. 2022
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Robust selection of clean swept-sine measurements in non-stationary noise'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä