Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures

Max Maria Bisch; Chongyang Zeng; Rongfei Juan; Junhe Lian; Xiangfan Fang

doi:10.1007/978-3-031-42093-1_52

Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures

Max Maria Bisch^*, Chongyang Zeng, Rongfei Juan, Junhe Lian, Xiangfan Fang

^*Tämän työn vastaava kirjoittaja

University of Siegen

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

Abstrakti

Belonging to the 3^rd generation of Advanced High Strength Steels (AHSS), Quenching and Partitioning (Q&P)-steels exhibit an excellent combination of high strength and good ductility while having a similar alloying concept as the already existing 1^st and 2^nd generation AHSS, such as DP- and TRIP-steels. To widen the understanding of mechanical response to high-speed loading, a broad range of strain rates from 0.0001/s up to 1000/s was studied for two grades of Q&P-steels, namely QP980 and QP1180. Special attention is given to the hardening behavior, which is influenced by a rate-dependent TRIP effect. The strain rate effect on the microstructure evolution is also investigated to enable the connection of the rate-dependent TRIP effect with the respective mechanical response.

Alkuperäiskieli	Englanti
Otsikko	Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4
Toimittajat	Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot, Tudor Balan
Kustantaja	Springer
Sivut	544-555
Sivumäärä	12
ISBN (painettu)	978-3-031-42092-4
DOI - pysyväislinkit	https://doi.org/10.1007/978-3-031-42093-1_52
Tila	Julkaistu - 2024
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Technology of Plasticity - Mandelieu-La Napoule, Ranska Kesto: 24 syysk. 2023 → 29 syysk. 2023 Konferenssinumero: 14

Julkaisusarja

Nimi	Lecture Notes in Mechanical Engineering
ISSN (painettu)	2195-4356
ISSN (elektroninen)	2195-4364

Conference

Conference	International Conference on Technology of Plasticity
Lyhennettä	ICTP
Maa/Alue	Ranska
Kaupunki	Mandelieu-La Napoule
Ajanjakso	24/09/2023 → 29/09/2023

Pääsy asiakirjaan

10.1007/978-3-031-42093-1_52

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

Siteeraa tätä

Bisch, M. M., Zeng, C., Juan, R., Lian, J., & Fang, X. (2024). Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures. teoksessa K. Mocellin, P.-O. Bouchard, R. Bigot, & T. Balan (Toimittajat), Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4 (Sivut 544-555). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-031-42093-1_52

Bisch, Max Maria ; Zeng, Chongyang ; Juan, Rongfei et al. / Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4. Toimittaja / Katia Mocellin ; Pierre-Olivier Bouchard ; Régis Bigot ; Tudor Balan. Springer, 2024. Sivut 544-555 (Lecture Notes in Mechanical Engineering).

@inproceedings{cee093c4429a4c1eb1fa0a7c8312f887,

title = "Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures",

abstract = "Belonging to the 3rd generation of Advanced High Strength Steels (AHSS), Quenching and Partitioning (Q&P)-steels exhibit an excellent combination of high strength and good ductility while having a similar alloying concept as the already existing 1st and 2nd generation AHSS, such as DP- and TRIP-steels. To widen the understanding of mechanical response to high-speed loading, a broad range of strain rates from 0.0001/s up to 1000/s was studied for two grades of Q&P-steels, namely QP980 and QP1180. Special attention is given to the hardening behavior, which is influenced by a rate-dependent TRIP effect. The strain rate effect on the microstructure evolution is also investigated to enable the connection of the rate-dependent TRIP effect with the respective mechanical response.",

keywords = "High-Speed Testing, Q&P steel, TRIP effect",

author = "Bisch, {Max Maria} and Chongyang Zeng and Rongfei Juan and Junhe Lian and Xiangfan Fang",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.; International Conference on Technology of Plasticity, ICTP ; Conference date: 24-09-2023 Through 29-09-2023",

year = "2024",

doi = "10.1007/978-3-031-42093-1_52",

language = "English",

isbn = "978-3-031-42092-4",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer",

pages = "544--555",

editor = "Katia Mocellin and Pierre-Olivier Bouchard and R{\'e}gis Bigot and Tudor Balan",

booktitle = "Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4",

address = "Germany",

}

Bisch, MM, Zeng, C, Juan, R , Lian, J & Fang, X 2024, Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures. julkaisussa K Mocellin, P-O Bouchard, R Bigot & T Balan (toim), Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4. Lecture Notes in Mechanical Engineering, Springer, Sivut 544-555, International Conference on Technology of Plasticity, Mandelieu-La Napoule, Ranska, 24/09/2023. https://doi.org/10.1007/978-3-031-42093-1_52

Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures. / Bisch, Max Maria; Zeng, Chongyang; Juan, Rongfei et al.
Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4. toim. / Katia Mocellin; Pierre-Olivier Bouchard; Régis Bigot; Tudor Balan. Springer, 2024. s. 544-555 (Lecture Notes in Mechanical Engineering).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures

AU - Bisch, Max Maria

AU - Zeng, Chongyang

AU - Juan, Rongfei

AU - Lian, Junhe

AU - Fang, Xiangfan

N1 - Conference code: 14

PY - 2024

Y1 - 2024

N2 - Belonging to the 3rd generation of Advanced High Strength Steels (AHSS), Quenching and Partitioning (Q&P)-steels exhibit an excellent combination of high strength and good ductility while having a similar alloying concept as the already existing 1st and 2nd generation AHSS, such as DP- and TRIP-steels. To widen the understanding of mechanical response to high-speed loading, a broad range of strain rates from 0.0001/s up to 1000/s was studied for two grades of Q&P-steels, namely QP980 and QP1180. Special attention is given to the hardening behavior, which is influenced by a rate-dependent TRIP effect. The strain rate effect on the microstructure evolution is also investigated to enable the connection of the rate-dependent TRIP effect with the respective mechanical response.

AB - Belonging to the 3rd generation of Advanced High Strength Steels (AHSS), Quenching and Partitioning (Q&P)-steels exhibit an excellent combination of high strength and good ductility while having a similar alloying concept as the already existing 1st and 2nd generation AHSS, such as DP- and TRIP-steels. To widen the understanding of mechanical response to high-speed loading, a broad range of strain rates from 0.0001/s up to 1000/s was studied for two grades of Q&P-steels, namely QP980 and QP1180. Special attention is given to the hardening behavior, which is influenced by a rate-dependent TRIP effect. The strain rate effect on the microstructure evolution is also investigated to enable the connection of the rate-dependent TRIP effect with the respective mechanical response.

KW - High-Speed Testing

KW - Q&P steel

KW - TRIP effect

UR - http://www.scopus.com/inward/record.url?scp=85174436587&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-42093-1_52

DO - 10.1007/978-3-031-42093-1_52

M3 - Conference article in proceedings

AN - SCOPUS:85174436587

SN - 978-3-031-42092-4

T3 - Lecture Notes in Mechanical Engineering

SP - 544

EP - 555

BT - Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4

A2 - Mocellin, Katia

A2 - Bouchard, Pierre-Olivier

A2 - Bigot, Régis

A2 - Balan, Tudor

PB - Springer

T2 - International Conference on Technology of Plasticity

Y2 - 24 September 2023 through 29 September 2023

ER -

Bisch MM, Zeng C, Juan R , Lian J, Fang X. Rate-Dependent Hardening Behavior and TRIP Effect in Quenching and Partitioning Steels for Application in Crash Energy-Absorbing Structures. julkaisussa Mocellin K, Bouchard PO, Bigot R, Balan T, toimittajat, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 4. Springer. 2024. s. 544-555. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-031-42093-1_52