Provision of Synthetic Inertia Support for Converter-Dominated Weak Grids

Meysam Saeedian, Bahram Pournazarian, Shamsodin Taheri, Edris Pouresmaeil*

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

10 Sitaatiot (Scopus)
121 Lataukset (Pure)

Abstrakti

Insufficient inertia is the paramount challenge in power system transition toward 100% converter-based generation. A promising solution to this issue is utilizing distributed virtual inertia (DVI) concept, i.e., releasing energy stored in the dc-link capacitors of power converters employed in the grid following a frequency disturbance. Nevertheless, this method has two drawbacks: 1 ) the dc-link voltage is not reverted to its reference value after the power mismatch between generation and demand, and 2 ) it yields instability of a local mode associated with the control system when the converter operates in weak grids. To overcome the aforesaid problems, the conventional DVI loop is modified so as not to affect the outer loop voltage regulator after transient. Moreover, an efficient compensator is presented in this article which eliminates the adverse impact of DVI technique on the converter stability in weak grid connections. The efficacy of proposed control scheme is depicted by simulations in MATLAB. The results illustrate that an improvement of 23% is evident in the grid frequency rate of change following a frequency contingency collated with the case in which the DVI loop staying nullified.
AlkuperäiskieliEnglanti
Sivut2068-2077
Sivumäärä10
JulkaisuIEEE Systems Journal
Vuosikerta16
Numero2
Varhainen verkossa julkaisun päivämäärä12 maalisk. 2021
DOI - pysyväislinkit
TilaJulkaistu - kesäk. 2022
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Provision of Synthetic Inertia Support for Converter-Dominated Weak Grids'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä