Properties of the pulsed electric current sintered Ni-Mn-Ga-Co-WC composites

Frans Nilsen*, Ilkka Aaltio, Yanling Ge, Outi Söderberg, Illya Glavastkyy, Mika Lahelin, Ryuji Maki, Simo-Pekka Hannula

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

4 Sitaatiot (Scopus)

Abstrakti

Two double dispersion composites were prepared by pulsed electric current sintering (PECS) from two powders on Ni-Mn-Ga-Co/WC-Co system. Composite I consists of 90 vol% WC-12Co and 10 vol% of non-modulated Ni-Mn-Ga-Co martensite and Composite 2 of 18 vol% of WC-12Co and 82 vol% of 10 M Ni-Mn-Ga-Co martensite. Damping capabilities of both composites were studied with DMA and cavitation erosion resistance tests. Both composites show promise as candidates as damping element materials when high hardness and wear resistance is required but Composite 2 had a higher damping capability. The high damping ability of composites are proposed to be derived from the combined effect of energy dissipation by twin boundary movement in the Ni-Mn-Ga matrix combined with the high hardness and wear resistance arising from the tungsten carbides. (C) 2015 Elsevier B.V. All rights reserved.

AlkuperäiskieliEnglanti
Sivut408-415
Sivumäärä8
JulkaisuJournal of Alloys and Compounds
Vuosikerta656
DOI - pysyväislinkit
TilaJulkaistu - 25 tammikuuta 2016
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki Sukella tutkimusaiheisiin 'Properties of the pulsed electric current sintered Ni-Mn-Ga-Co-WC composites'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

  • Laitteet

  • Lehtileikkeet

    Processing and properties of MSM based hybrid materials

    Simo-Pekka Hannula & Outi Söderberg

    18/07/2018

    1 kohde/ Medianäkyvyys

    Lehdistö/media: Esiintyminen mediassa

    Siteeraa tätä