Production and characterization of porous magnetic biochar : before and after phosphate adsorption insights

Oleksii Tomin*, Maryam Roza Yazdani

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

13 Sitaatiot (Scopus)
83 Lataukset (Pure)

Abstrakti

The modification process of biochars enables different advantages including enhanced adsorption properties for different pollutants. Herein, porous magnetic biochars (PMB) were successfully produced from softwood biomass through a two-step pyrolysis process together with FeCl3 modification. The effect of production temperature on adsorption was studied at 200 or 300 °C, followed by iron salt modification and subsequent pyrolysis at 600 or 800 °C. Biochars were characterized before and after phosphate adsorption via various characterization methods to acquire structural, elemental, and morphological properties of the adsorbent. The effects of phosphate concentration, contact time, and temperature on the adsorption process were examined in the batch mode. The characterization showed embedded iron oxide crystals of 23 nm within the biochar structure with a magnetic strength of 38.9 emu/g, which can assist the separation process of the powdered adsorbent from the aqueous medium. The surface area of the PMB was measured as 93 m2/g and 0.002 cm3/g pore volume. PMB showed complete removal (100%) of phosphate at the lower concentration (5 mg/l P). At higher concentration (25 mg/l P), the biochar prepared under 200/800 °C showed the highest removal (30%). The adsorption was enhanced with time (optimal 3 h) and temperature, which shows endothermic chemisorption following Langmuir isotherm and Pseudo-second order kinetic models. The desorption study suggested the slow release of phosphate from the spent adsorbent and potential reuse for soil enhancement. These results point towards the sustainable use of PMB as an effective and magnetically recyclable adsorbent for phosphate removal and reclaim.

AlkuperäiskieliEnglanti
Sivut849-859
Sivumäärä11
JulkaisuJournal of Porous Materials
Vuosikerta29
Numero3
Varhainen verkossa julkaisun päivämäärä1 maalisk. 2022
DOI - pysyväislinkit
TilaJulkaistu - kesäk. 2022
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Production and characterization of porous magnetic biochar : before and after phosphate adsorption insights'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä