Process simulation and environmental footprint of gold chlorination and cyanidation processes

Heini Elomaa, Lotta Rintala, Mari Lundström

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientificvertaisarvioitu

53 Lataukset (Pure)

Abstrakti

Chlorination was applied widely in gold processing throughout the 1800s as vat and barrel leaching, with chlorine gas acting as an oxidant. In the early 1900s, hydrometallurgical gold process technology changed from chlorination to cyanidation, which replaced chlorination as the predominant gold leaching
process due to technical and financial advantages. The challenges in the chlorination process were related to the highly corrosive leaching chemicals and associated high reagent consumption. In the past, new gold extraction technologies have not been evaluated by their environmental footprint, but
rather by the financial, technological and operational advantages. In order to determine the associated ecological impact and sustainability, new transformative technologies need to be evaluated from the
environmental footprint point of view prior commercialization. In this study, the environmental indicator category chosen for evaluation was global warming potential (GWP) and the other impact categories, such as human toxicity potential and acidification were left out of the scope. The global warming
potentials (GWP) were determined both for the historical chlorination process and for a state-of art cyanidation process by modelling with HSC Chemistry 8.0 HSC-Sim module combined with lifecycle analysis by GaBi 6.0. This analysis provides a baseline scenario for comparison, which can be used to support the future life cycle assessment research for development stage gold processes. The
combination of HSC-Sim and GaBi was shown to be an efficient way for the investigation of the environmental footprint of the historical and current gold processes. The GWP of the cyanidation process was 455 kg CO2 equivalent and the GWP of chlorination process was 10500 kg CO2 equivalent.
The main emission source in cyanidation was found to be electricity, whereas in chlorination the main emissions originated from the chlorine gas, although, it is worth noting that environmental impacts are not defined for all chemical products in the GaBi database. Additionally, some compromises had to be
made when the LCA Equivalents were applied to the process streams modelled in HSC-Sim. The corresponding or most appropriate LCA Equivalents were defined from the HSC/GaBi database and the LCA group was defined for all the inputs and outputs within the scope of the process.
AlkuperäiskieliEnglanti
OtsikkoEuropean Metallurgical Conference, EMC
KustantajaGDMB Verlag GmbH
Sivut1293-1310
Vuosikerta3
ISBN (elektroninen)978-3-940276-74-2
TilaJulkaistu - 25 kesäkuuta 2017
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
Tapahtuma European Metallurgical Conference - Leipzig, Saksa
Kesto: 25 kesäkuuta 201728 kesäkuuta 2017
Konferenssinumero: 9

Conference

Conference European Metallurgical Conference
LyhennettäEMC
MaaSaksa
KaupunkiLeipzig
Ajanjakso25/06/201728/06/2017

Sormenjälki

Sukella tutkimusaiheisiin 'Process simulation and environmental footprint of gold chlorination and cyanidation processes'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä