Overview of ASDEX Upgrade results
- Max Planck IPP-EURATOM Assoziation
- Inst Super Tecn, Instituto Superior Tecnico, Universidade de Lisboa, Assoc Euratom IST, Inst Plasmas & Fusao Nucl
- VTT Technical Research Centre of Finland
- TEC, FOM Inst DIFFER
- EURATOM CCFE Fus Assoc, Euratom, Culham Sci Ctr
- Technical University of Munich
- Consorzio RFX
- Forschungszentrum Julich GmbH, Helmholtz Association, Research Center Julich, Inst Energie & Klimaforsch Plasmaphys
- Univ Nancy, Centre National de la Recherche Scientifique (CNRS), Universite de Lorraine, CNRS, Inst Jean Lamour
- Chinese Academy of Sciences
- Ecole Polytechnique Federale de Lausanne
The ASDEX Upgrade (AUG) programme is directed towards physics input to critical elements of the ITER design and the preparation of ITER operation, as well as addressing physics issues for a future DEMO design. Since 2015, AUG is equipped with a new pair of 3-strap ICRF antennas, which were designed for a reduction of tungsten release during ICRF operation. As predicted, a factor two reduction on the ICRF-induced W plasma content could be achieved by the reduction of the sheath voltage at the antenna limiters via the compensation of the image currents of the central and side straps in the antenna frame. There are two main operational scenario lines in AUG. Experiments with low collisionality, which comprise current drive, ELM mitigation/suppression and fast ion physics, are mainly done with freshly boronized walls to reduce the tungsten influx at these high edge temperature conditions. Full ELM suppression and non-inductive operation up to a plasma current of I-p = 0.8 MA could be obtained at low plasma density. Plasma exhaust is studied under conditions of high neutral divertor pressure and separatrix electron density, where a fresh boronization is not required. Substantial progress could be achieved for the understanding of the confinement degradation by strong D puffing and the improvement with nitrogen or carbon seeding. Inward/outward shifts of the electron density profile relative to the temperature profile effect the edge stability via the pressure profile changes and lead to improved/decreased pedestal performance. Seeding and D gas puffing are found to effect the core fueling via changes in a region of high density on the high field side (HFSHD).
The integration of all above mentioned operational scenarios will be feasible and naturally obtained in a large device where the edge is more opaque for neutrals and higher plasma temperatures provide a lower collisionality. The combination of exhaust control with pellet fueling has been successfully demonstrated. High divertor enrichment values of nitrogen E-N >= 10 have been obtained during pellet injection, which is a prerequisite for the simultaneous achievement of good core plasma purity and high divertor radiation levels. Impurity accumulation observed in the all-metal AUG device caused by the strong neoclassical inward transport of tungsten in the pedestal is expected to be relieved by the higher neoclassical temperature screening in larger devices.
|Tila||Julkaistu - lokakuuta 2017|
|OKM-julkaisutyyppi||A1 Julkaistu artikkeli, soviteltu|