Optimisation of FGM TBC and their thermal cycling stability

M Gasik; Akira Kawasaki; YS Kang

doi:10.4028/www.scientific.net/MSF.492-493.9

Optimisation of FGM TBC and their thermal cycling stability

M Gasik, Akira Kawasaki, YS Kang

Tohoku University

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

Abstrakti

Application of FGM concept for thermal barrier coatings (TBC) provides a superior thermal stress relaxation over homogeneous or duplex coatings. It was demonstrated that FGM TBC have better oxidation resistance and longer lifetime during test conditions. In this work, new FGM TBC system was designed using high-velocity oxygen flame (HVOF) coating process. After coatings optimisation, coating layer was subjected to a hot burner test for thermal fatigue cycling with increasing heat load. It was found that FGM TBC has successfully withstood thermal cycling and prevented visible delamination or transverse cracks. New coating design may give an opportunity to develop a cost-effective FGM TBC system for gas turbine applications.

Alkuperäiskieli	Englanti
Otsikko	FUNCTIONALLY GRADED MATERIALS VIII
Toimittajat	O VanderBiest, M Gasik, J Vleugels
Kustantaja	Trans Tech Publications
Sivut	9-14
Sivumäärä	6
ISBN (painettu)	0-87849-970-9
DOI - pysyväislinkit	https://doi.org/10.4028/www.scientific.net/MSF.492-493.9
Tila	Julkaistu - 2005
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Symposium on Multifunctional and Functionally Graded Materials - Leuven, Belgia Kesto: 11 heinäk. 2004 → 14 heinäk. 2004 Konferenssinumero: 8

Julkaisusarja

Nimi	Materials Science Forum
Kustantaja	TRANS TECH PUBLICATIONS LTD
Vuosikerta	492-493
ISSN (painettu)	0255-5476
ISSN (elektroninen)	1662-9752

Conference

Conference	International Symposium on Multifunctional and Functionally Graded Materials
Lyhennettä	FGM
Maa/Alue	Belgia
Kaupunki	Leuven
Ajanjakso	11/07/2004 → 14/07/2004

Pääsy asiakirjaan

10.4028/www.scientific.net/MSF.492-493.9

Siteeraa tätä

@inproceedings{227446a6b0ac42f2915599c3b3093278,

title = "Optimisation of FGM TBC and their thermal cycling stability",

abstract = "Application of FGM concept for thermal barrier coatings (TBC) provides a superior thermal stress relaxation over homogeneous or duplex coatings. It was demonstrated that FGM TBC have better oxidation resistance and longer lifetime during test conditions. In this work, new FGM TBC system was designed using high-velocity oxygen flame (HVOF) coating process. After coatings optimisation, coating layer was subjected to a hot burner test for thermal fatigue cycling with increasing heat load. It was found that FGM TBC has successfully withstood thermal cycling and prevented visible delamination or transverse cracks. New coating design may give an opportunity to develop a cost-effective FGM TBC system for gas turbine applications.",

keywords = "coatings, TBC, hot burner test, superalloys, alumina, zirconia, residual stresses",

author = "M Gasik and Akira Kawasaki and YS Kang",

year = "2005",

doi = "10.4028/www.scientific.net/MSF.492-493.9",

language = "English",

isbn = "0-87849-970-9",

series = "Materials Science Forum",

publisher = "Trans Tech Publications",

pages = "9--14",

editor = "O VanderBiest and M Gasik and J Vleugels",

booktitle = "FUNCTIONALLY GRADED MATERIALS VIII",

address = "Switzerland",

note = "International Symposium on Multifunctional and Functionally Graded Materials , FGM ; Conference date: 11-07-2004 Through 14-07-2004",

}

Gasik, M, Kawasaki, A & Kang, YS 2005, Optimisation of FGM TBC and their thermal cycling stability. julkaisussa O VanderBiest, M Gasik & J Vleugels (toim), FUNCTIONALLY GRADED MATERIALS VIII. Materials Science Forum, Vuosikerta 492-493, Trans Tech Publications, Sivut 9-14, International Symposium on Multifunctional and Functionally Graded Materials , Leuven, Belgia, 11/07/2004. https://doi.org/10.4028/www.scientific.net/MSF.492-493.9

Optimisation of FGM TBC and their thermal cycling stability. / Gasik, M; Kawasaki, Akira; Kang, YS.
FUNCTIONALLY GRADED MATERIALS VIII. toim. / O VanderBiest; M Gasik; J Vleugels. Trans Tech Publications, 2005. s. 9-14 (Materials Science Forum; Vuosikerta 492-493).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Optimisation of FGM TBC and their thermal cycling stability

AU - Gasik, M

AU - Kawasaki, Akira

AU - Kang, YS

N1 - Conference code: 8

PY - 2005

Y1 - 2005

N2 - Application of FGM concept for thermal barrier coatings (TBC) provides a superior thermal stress relaxation over homogeneous or duplex coatings. It was demonstrated that FGM TBC have better oxidation resistance and longer lifetime during test conditions. In this work, new FGM TBC system was designed using high-velocity oxygen flame (HVOF) coating process. After coatings optimisation, coating layer was subjected to a hot burner test for thermal fatigue cycling with increasing heat load. It was found that FGM TBC has successfully withstood thermal cycling and prevented visible delamination or transverse cracks. New coating design may give an opportunity to develop a cost-effective FGM TBC system for gas turbine applications.

AB - Application of FGM concept for thermal barrier coatings (TBC) provides a superior thermal stress relaxation over homogeneous or duplex coatings. It was demonstrated that FGM TBC have better oxidation resistance and longer lifetime during test conditions. In this work, new FGM TBC system was designed using high-velocity oxygen flame (HVOF) coating process. After coatings optimisation, coating layer was subjected to a hot burner test for thermal fatigue cycling with increasing heat load. It was found that FGM TBC has successfully withstood thermal cycling and prevented visible delamination or transverse cracks. New coating design may give an opportunity to develop a cost-effective FGM TBC system for gas turbine applications.

KW - coatings

KW - TBC

KW - hot burner test

KW - superalloys

KW - alumina

KW - zirconia

KW - residual stresses

U2 - 10.4028/www.scientific.net/MSF.492-493.9

DO - 10.4028/www.scientific.net/MSF.492-493.9

M3 - Conference article in proceedings

SN - 0-87849-970-9

T3 - Materials Science Forum

SP - 9

EP - 14

BT - FUNCTIONALLY GRADED MATERIALS VIII

A2 - VanderBiest, O

A2 - Gasik, M

A2 - Vleugels, J

PB - Trans Tech Publications

T2 - International Symposium on Multifunctional and Functionally Graded Materials

Y2 - 11 July 2004 through 14 July 2004

ER -

Optimisation of FGM TBC and their thermal cycling stability

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä