Mechanically Tunable Single-Walled Carbon Nanotube Films as a Universal Material for Transparent and Stretchable Electronics

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

  • Evgenia P. Gilshteyn
  • Stepan A. Romanov
  • Daria S. Kopylova
  • Georgy V. Savostyanov
  • Anton S. Anisimov
  • Olga E. Glukhova
  • Professor Albert Nasibulin

Organisaatiot

  • Saratov NG Chernyshevskii State Univ, Saratov State University, Dept Phys
  • Canatu Ltd.
  • IM Sechenov First Moscow State Med Univ, Sechenov First Moscow State Medical University, Inst Bion Technol & Engn
  • Skolkovo Institute of Science and Technology
  • Skolkovo Inst Sci & Technol, Skolkovo Institute of Science & Technology, Ctr Photon & Quantum Mat

Kuvaus

Soft, flexible, and stretchable electronic devices provide novel integration opportunities for wearable and implantable technologies. Despite the existing efforts to endow electronics with the capability of large deformation, the main technological challenge is still in the absence of suitable materials for the manufacturing of stretchable electronic circuits and devices with active (sensitive) and passive (stable) components. Here, we present a universal material, based on single-walled carbon nanotube (SWCNT) films deposited on a polydimethylsiloxane (PDMS) substrate, which can act as a material being both sensitive and insensitive to strain. The diverse performance of SWCNT/PDMS structures was achieved by two simple dry-transfer fabrication approaches: SWCNT film deposition onto the as-prepared PDMS and on the prestretched PDMS surface. The correlation between applied strain, microstructural evolution, and electro-optical properties is discussed on the basis of both experimental and computational results. The SWCNT/PDMS material with the mechanically tunable performance has a small relative resistance change from 0.05 to 0.07, while being stretched from 10 to 40% (stable electrode applications). A high sensitivity of 20.1 of the SWCNT/PDMS structures at a 100% strain was achieved (strain sensing applications). Our SWCNT/PDMS structures have superior transparency and conductivity compared to the ones reported previously, including the SWCNT/PDMS structures, obtained by wet processes.

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut27327-27334
Sivumäärä8
JulkaisuACS Applied Materials and Interfaces
Vuosikerta11
Numero30
TilaJulkaistu - 31 heinäkuuta 2019
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

ID: 36270178