Material point method modelling of granular flow in inclined channels

Wojciech Tomasz Sołowski; Scott William Sloan

doi:10.4028/www.scientific.net/AMM.553.501

Material point method modelling of granular flow in inclined channels

Wojciech Tomasz Sołowski, Scott William Sloan

Ei julkaistu Aalto-yliopiston affiliaatiolla

University of Newcastle

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

3 Sitaatiot (Scopus)

Abstrakti

The material point method is a novel numerical technique which is especially well-suited to solving problems involving large or extreme deformations. This paper shows the results of the modelling of flow of granular material in inclined channels. During the calculations the granular material is approximated by a Mohr-Coulomb constitutive model. The computed flow is subsequently compared to experimental results published in the literature.

Alkuperäiskieli	Englanti
Otsikko	Applied Mechanics and Materials
Kustantaja	Trans Tech Publications
Sivut	501-506
Sivumäärä	6
Vuosikerta	553
ISBN (painettu)	9783038350682
DOI - pysyväislinkit	https://doi.org/10.4028/www.scientific.net/AMM.553.501
Tila	Julkaistu - 2014
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	Australasian Conference on Computational Mechanics - Sydney, Austraalia Kesto: 3 lokak. 2013 → 4 lokak. 2013 Konferenssinumero: 1

Julkaisusarja

Nimi	Applied Mechanics and Materials
Vuosikerta	553
ISSN (painettu)	16609336
ISSN (elektroninen)	16627482

Conference

Conference	Australasian Conference on Computational Mechanics
Lyhennettä	ACCM
Maa/Alue	Austraalia
Kaupunki	Sydney
Ajanjakso	03/10/2013 → 04/10/2013

Pääsy asiakirjaan

10.4028/www.scientific.net/AMM.553.501

Muut tiedostot ja linkit

Link to publication in Scopus

Siteeraa tätä

@inproceedings{d3d40629dea94ec5bfe50d442247a5a2,

title = "Material point method modelling of granular flow in inclined channels",

abstract = "The material point method is a novel numerical technique which is especially well-suited to solving problems involving large or extreme deformations. This paper shows the results of the modelling of flow of granular material in inclined channels. During the calculations the granular material is approximated by a Mohr-Coulomb constitutive model. The computed flow is subsequently compared to experimental results published in the literature.",

keywords = "Granular flow, Material point method, Mohr-coulomb constitutive model, Numerical analysis, Sand modeling",

author = "So{\l}owski, \{Wojciech Tomasz\} and Sloan, \{Scott William\}",

year = "2014",

doi = "10.4028/www.scientific.net/AMM.553.501",

language = "English",

isbn = "9783038350682",

volume = "553",

series = "Applied Mechanics and Materials",

publisher = "Trans Tech Publications",

pages = "501--506",

booktitle = "Applied Mechanics and Materials",

address = "Switzerland",

note = "Australasian Conference on Computational Mechanics, ACCM ; Conference date: 03-10-2013 Through 04-10-2013",

}

Sołowski, WT & Sloan, SW 2014, Material point method modelling of granular flow in inclined channels. julkaisussa Applied Mechanics and Materials. Vuosikerta 553, Applied Mechanics and Materials, Vuosikerta 553, Trans Tech Publications, Sivut 501-506, Australasian Conference on Computational Mechanics, Sydney, Austraalia, 03/10/2013. https://doi.org/10.4028/www.scientific.net/AMM.553.501

Material point method modelling of granular flow in inclined channels. / Sołowski, Wojciech Tomasz; Sloan, Scott William.
Applied Mechanics and Materials. Vuosikerta 553 Trans Tech Publications, 2014. s. 501-506 (Applied Mechanics and Materials; Vuosikerta 553).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Material point method modelling of granular flow in inclined channels

AU - Sołowski, Wojciech Tomasz

AU - Sloan, Scott William

N1 - Conference code: 1

PY - 2014

Y1 - 2014

N2 - The material point method is a novel numerical technique which is especially well-suited to solving problems involving large or extreme deformations. This paper shows the results of the modelling of flow of granular material in inclined channels. During the calculations the granular material is approximated by a Mohr-Coulomb constitutive model. The computed flow is subsequently compared to experimental results published in the literature.

AB - The material point method is a novel numerical technique which is especially well-suited to solving problems involving large or extreme deformations. This paper shows the results of the modelling of flow of granular material in inclined channels. During the calculations the granular material is approximated by a Mohr-Coulomb constitutive model. The computed flow is subsequently compared to experimental results published in the literature.

KW - Granular flow

KW - Material point method

KW - Mohr-coulomb constitutive model

KW - Numerical analysis

KW - Sand modeling

UR - https://www.scopus.com/pages/publications/84902120041

U2 - 10.4028/www.scientific.net/AMM.553.501

DO - 10.4028/www.scientific.net/AMM.553.501

M3 - Conference article in proceedings

AN - SCOPUS:84902120041

SN - 9783038350682

VL - 553

T3 - Applied Mechanics and Materials

SP - 501

EP - 506

BT - Applied Mechanics and Materials

PB - Trans Tech Publications

T2 - Australasian Conference on Computational Mechanics

Y2 - 3 October 2013 through 4 October 2013

ER -

Material point method modelling of granular flow in inclined channels

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä