Long-term stability of aerophilic metallic surfaces underwater

Alexander B. Tesler; Stefan Kolle; Lucia H. Prado; Ingo Thievessen; David Böhringer; Matilda Backholm; Bhuvaneshwari Karunakaran; Heikki A. Nurmi; Mika Latikka; Lena Fischer; Shane Stafslien; Zoran M. Cenev; Jaakko V.I. Timonen; Mark Bruns; Anca Mazare; Ulrich Lohbauer; Sannakaisa Virtanen; Ben Fabry; Patrik Schmuki; Robin H.A. Ras; Joanna Aizenberg; Wolfgang H. Goldmann

doi:10.1038/s41563-023-01670-6

Long-term stability of aerophilic metallic surfaces underwater

Alexander B. Tesler^*
, Stefan Kolle
, Lucia H. Prado
, Ingo Thievessen
, David Böhringer
, Matilda Backholm
, Bhuvaneshwari Karunakaran
, Heikki A. Nurmi
, Mika Latikka
, Lena Fischer
, Shane Stafslien
, Zoran M. Cenev
, Jaakko V.I. Timonen
, Mark Bruns
, Anca Mazare
, Ulrich Lohbauer
, Sannakaisa Virtanen
, Ben Fabry
, Patrik Schmuki
, Robin H.A. Ras

Joanna Aizenberg, Wolfgang H. Goldmann^*

^*Tämän työn vastaava kirjoittaja

Tutkimustuotos: Lehtiartikkeli › Article › Scientific › vertaisarvioitu

79 Sitaatiot (Scopus)

136 Lataukset (Pure)

Abstrakti

Aerophilic surfaces immersed underwater trap films of air known as plastrons. Plastrons have typically been considered impractical for underwater engineering applications due to their metastable performance. Here, we describe aerophilic titanium alloy (Ti) surfaces with extended plastron lifetimes that are conserved for months underwater. Long-term stability is achieved by the formation of highly rough hierarchically structured surfaces via electrochemical anodization combined with a low-surface-energy coating produced by a fluorinated surfactant. Aerophilic Ti surfaces drastically reduce blood adhesion and, when submerged in water, prevent adhesion of bacteria and marine organisms such as barnacles and mussels. Overall, we demonstrate a general strategy to achieve the long-term stability of plastrons on aerophilic surfaces for previously unattainable underwater applications.

Alkuperäiskieli	Englanti
Sivut	1548-1555
Sivumäärä	8
Julkaisu	Nature Materials
Vuosikerta	22
Numero	12
Varhainen verkossa julkaisun päivämäärä	18 syysk. 2023
DOI - pysyväislinkit	https://doi.org/10.1038/s41563-023-01670-6
Tila	Julkaistu - jouluk. 2023
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Rahoitus

We thank A. Marmur for fruitful discussions on the plastron stability of Ti-APhS. A.B.T. thanks N. Vogel and J. Harrer for help with AFM measurements and E. Alkhateeb for help with X-ray diffraction measurements. A.B.T. thanks F. Krause from Keyence Deutschland GmbH for providing a laser confocal microscope for surface roughness measurements. W.H.G. and A.B.T. are indebted to L. Nicholson (Master of Arts) for proofreading the manuscript. We acknowledge the provision of facilities and technical support by Aalto University at OtaNano’s Nanomicroscopy Center (Aalto-NMC). A.B.T., P.S., W.H.G. and B.F. thank the Deutsche Forschungsgemeinschaft (DFG; SCHM 1597/38-1 and FA 336/13-1) for their financial support. A.B.T. acknowledges the Emerging Talents Initiative (ETI) of the Friedrich-Alexander-Universität Erlangen-Nürnberg (grant agreement number 5500102). This work was funded in part by grants from the German Science Foundation (DFG; FA 336-12/1, TRR-SFB 225 Projects A01 and C02). J.V.I.T. acknowledges funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER), project number 346112. M. Backholm acknowledges postdoctoral funding from the Academy of Finland (grant agreement number 309237). M. Bruns, B.K., H.A.N., M.L., Z.M.C., J.V.I.T. and R.H.A.R. acknowledge funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER, project number 346109). S.S. acknowledges funding from the Office of Naval Research, US Department of Defense (grant N00014-17-1-2153). S.K. and J.A. acknowledge funding from the Office of Naval Research, US Department of Defense (grants N00014-15-1-2323 and N00014-17-1-2913) and the Department of Energy (award DE-SC0005247).

Pääsy asiakirjaan

10.1038/s41563-023-01670-6

SCI_Tesler_etal_Nature_Materials_2023Accepted author manuscript, 1,55 MB

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

-: LIBER/Ras
Ras, R. (Vastuullinen johtaja), Morais Jaques, Y. (Projektin jäsen), Lepikko, S. (Projektin jäsen), Nurmi, H. (Projektin jäsen), Junaid, M. (Projektin jäsen), Liu, K. (Projektin jäsen), Huhtamäki, T. (Projektin jäsen), Wagener, L. Z. J. S. (Projektin jäsen), Zhou, S. (Projektin jäsen), Al-Terke, H. (Projektin jäsen), Vuckovac, M. (Projektin jäsen), Afzalifar, A. (Projektin jäsen) & Mattila, M. (Projektin jäsen)
01/01/2022 → 31/12/2024
Projekti: RCF Academy Project
-: LIBER/Timonen
Timonen, J. (Vastuullinen johtaja), Reyes Garza, R. (Projektin jäsen), Nokka, V. (Projektin jäsen), Luntama, S. (Projektin jäsen), Mandal, S. (Projektin jäsen), Kärki, T. (Projektin jäsen), Reinicke, O. (Projektin jäsen), Böling, S. (Projektin jäsen), S Menon, A. (Projektin jäsen), Niemiec, E. (Projektin jäsen), Beppu, K. (Projektin jäsen), Mäkynen, A. (Projektin jäsen), Virtanen, J. (Projektin jäsen) & Scacchi, A. (Projektin jäsen)
01/01/2022 → 31/12/2024
Projekti: RCF Academy Project
Pinning och dissipation av magnetiska droppar på superhydrofoba ytor
Backholm, M. (Vastuullinen johtaja)
01/09/2017 → 31/08/2022
Projekti: Academy of Finland: Other research funding

OtaNano
Rissanen, A. (Manager)
Aalto-yliopisto
Laitteistot/tilat: Facility
OtaNano Nanomikroskopiakeskus
Seitsonen, J. (Manager) & Rissanen, A. (Other)
OtaNano
Laitteistot/tilat: Facility

Water-Repellent Plastrons Keep Surfaces Dry for Months Underwater
Backholm, M., Timonen, J., Latikka, M., Ras, R. & Nurmi, H.
24/10/2023
2 kohdetta/ Medianäkyvyys
Lehdistö/media: Esiintyminen mediassa
News New Material Stays Dry for Months Underwater
Timonen, J., Ras, R., Backholm, M., Latikka, M. & Nurmi, H.
05/10/2023
4 kohdetta/ Medianäkyvyys
Lehdistö/media: Esiintyminen mediassa
Team develops superhydrophobic surface that can stay dry for months underwater
Timonen, J., Ras, R., Backholm, M., Latikka, M. & Nurmi, H.
04/10/2023
5 kohdetta/ Medianäkyvyys
Lehdistö/media: Esiintyminen mediassa

Siteeraa tätä

Tesler, A. B., Kolle, S., Prado, L. H., Thievessen, I., Böhringer, D., Backholm, M., Karunakaran, B., Nurmi, H. A., Latikka, M., Fischer, L., Stafslien, S., Cenev, Z. M., Timonen, J. V. I., Bruns, M., Mazare, A., Lohbauer, U., Virtanen, S., Fabry, B., Schmuki, P., ... Goldmann, W. H. (2023). Long-term stability of aerophilic metallic surfaces underwater. Nature Materials, 22(12), 1548-1555. https://doi.org/10.1038/s41563-023-01670-6

@article{c1c7eac975b84c36b9f560357a774095,

title = "Long-term stability of aerophilic metallic surfaces underwater",

abstract = "Aerophilic surfaces immersed underwater trap films of air known as plastrons. Plastrons have typically been considered impractical for underwater engineering applications due to their metastable performance. Here, we describe aerophilic titanium alloy (Ti) surfaces with extended plastron lifetimes that are conserved for months underwater. Long-term stability is achieved by the formation of highly rough hierarchically structured surfaces via electrochemical anodization combined with a low-surface-energy coating produced by a fluorinated surfactant. Aerophilic Ti surfaces drastically reduce blood adhesion and, when submerged in water, prevent adhesion of bacteria and marine organisms such as barnacles and mussels. Overall, we demonstrate a general strategy to achieve the long-term stability of plastrons on aerophilic surfaces for previously unattainable underwater applications.",

author = "Tesler, \{Alexander B.\} and Stefan Kolle and Prado, \{Lucia H.\} and Ingo Thievessen and David B{\"o}hringer and Matilda Backholm and Bhuvaneshwari Karunakaran and Nurmi, \{Heikki A.\} and Mika Latikka and Lena Fischer and Shane Stafslien and Cenev, \{Zoran M.\} and Timonen, \{Jaakko V.I.\} and Mark Bruns and Anca Mazare and Ulrich Lohbauer and Sannakaisa Virtanen and Ben Fabry and Patrik Schmuki and Ras, \{Robin H.A.\} and Joanna Aizenberg and Goldmann, \{Wolfgang H.\}",

note = "Funding Information: We thank A. Marmur for fruitful discussions on the plastron stability of Ti-APhS. A.B.T. thanks N. Vogel and J. Harrer for help with AFM measurements and E. Alkhateeb for help with X-ray diffraction measurements. A.B.T. thanks F. Krause from Keyence Deutschland GmbH for providing a laser confocal microscope for surface roughness measurements. W.H.G. and A.B.T. are indebted to L. Nicholson (Master of Arts) for proofreading the manuscript. We acknowledge the provision of facilities and technical support by Aalto University at OtaNano{\textquoteright}s Nanomicroscopy Center (Aalto-NMC). A.B.T., P.S., W.H.G. and B.F. thank the Deutsche Forschungsgemeinschaft (DFG; SCHM 1597/38-1 and FA 336/13-1) for their financial support. A.B.T. acknowledges the Emerging Talents Initiative (ETI) of the Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg (grant agreement number 5500102). This work was funded in part by grants from the German Science Foundation (DFG; FA 336-12/1, TRR-SFB 225 Projects A01 and C02). J.V.I.T. acknowledges funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER), project number 346112. M. Backholm acknowledges postdoctoral funding from the Academy of Finland (grant agreement number 309237). M. Bruns, B.K., H.A.N., M.L., Z.M.C., J.V.I.T. and R.H.A.R. acknowledge funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER, project number 346109). S.S. acknowledges funding from the Office of Naval Research, US Department of Defense (grant N00014-17-1-2153). S.K. and J.A. acknowledge funding from the Office of Naval Research, US Department of Defense (grants N00014-15-1-2323 and N00014-17-1-2913) and the Department of Energy (award DE-SC0005247). Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive licence to Springer Nature Limited.",

year = "2023",

month = dec,

doi = "10.1038/s41563-023-01670-6",

language = "English",

volume = "22",

pages = "1548--1555",

journal = "Nature Materials",

issn = "1476-1122",

publisher = "Nature Publishing Group",

number = "12",

}

Tesler, AB, Kolle, S, Prado, LH, Thievessen, I, Böhringer, D, Backholm, M , Karunakaran, B , Nurmi, HA, Latikka, M, Fischer, L, Stafslien, S, Cenev, ZM, Timonen, JVI, Bruns, M, Mazare, A, Lohbauer, U, Virtanen, S, Fabry, B, Schmuki, P, Ras, RHA, Aizenberg, J & Goldmann, WH 2023, 'Long-term stability of aerophilic metallic surfaces underwater', Nature Materials, Vuosikerta 22, Nro 12, Sivut 1548-1555. https://doi.org/10.1038/s41563-023-01670-6

TY - JOUR

T1 - Long-term stability of aerophilic metallic surfaces underwater

AU - Tesler, Alexander B.

AU - Kolle, Stefan

AU - Prado, Lucia H.

AU - Thievessen, Ingo

AU - Böhringer, David

AU - Backholm, Matilda

AU - Karunakaran, Bhuvaneshwari

AU - Nurmi, Heikki A.

AU - Latikka, Mika

AU - Fischer, Lena

AU - Stafslien, Shane

AU - Cenev, Zoran M.

AU - Timonen, Jaakko V.I.

AU - Bruns, Mark

AU - Mazare, Anca

AU - Lohbauer, Ulrich

AU - Virtanen, Sannakaisa

AU - Fabry, Ben

AU - Schmuki, Patrik

AU - Ras, Robin H.A.

AU - Aizenberg, Joanna

AU - Goldmann, Wolfgang H.

N1 - Funding Information: We thank A. Marmur for fruitful discussions on the plastron stability of Ti-APhS. A.B.T. thanks N. Vogel and J. Harrer for help with AFM measurements and E. Alkhateeb for help with X-ray diffraction measurements. A.B.T. thanks F. Krause from Keyence Deutschland GmbH for providing a laser confocal microscope for surface roughness measurements. W.H.G. and A.B.T. are indebted to L. Nicholson (Master of Arts) for proofreading the manuscript. We acknowledge the provision of facilities and technical support by Aalto University at OtaNano’s Nanomicroscopy Center (Aalto-NMC). A.B.T., P.S., W.H.G. and B.F. thank the Deutsche Forschungsgemeinschaft (DFG; SCHM 1597/38-1 and FA 336/13-1) for their financial support. A.B.T. acknowledges the Emerging Talents Initiative (ETI) of the Friedrich-Alexander-Universität Erlangen-Nürnberg (grant agreement number 5500102). This work was funded in part by grants from the German Science Foundation (DFG; FA 336-12/1, TRR-SFB 225 Projects A01 and C02). J.V.I.T. acknowledges funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER), project number 346112. M. Backholm acknowledges postdoctoral funding from the Academy of Finland (grant agreement number 309237). M. Bruns, B.K., H.A.N., M.L., Z.M.C., J.V.I.T. and R.H.A.R. acknowledge funding from the Academy of Finland Center of Excellence Program (2022–2029) in Life-Inspired Hybrid Materials (LIBER, project number 346109). S.S. acknowledges funding from the Office of Naval Research, US Department of Defense (grant N00014-17-1-2153). S.K. and J.A. acknowledge funding from the Office of Naval Research, US Department of Defense (grants N00014-15-1-2323 and N00014-17-1-2913) and the Department of Energy (award DE-SC0005247). Publisher Copyright: © 2023, The Author(s), under exclusive licence to Springer Nature Limited.

PY - 2023/12

Y1 - 2023/12

N2 - Aerophilic surfaces immersed underwater trap films of air known as plastrons. Plastrons have typically been considered impractical for underwater engineering applications due to their metastable performance. Here, we describe aerophilic titanium alloy (Ti) surfaces with extended plastron lifetimes that are conserved for months underwater. Long-term stability is achieved by the formation of highly rough hierarchically structured surfaces via electrochemical anodization combined with a low-surface-energy coating produced by a fluorinated surfactant. Aerophilic Ti surfaces drastically reduce blood adhesion and, when submerged in water, prevent adhesion of bacteria and marine organisms such as barnacles and mussels. Overall, we demonstrate a general strategy to achieve the long-term stability of plastrons on aerophilic surfaces for previously unattainable underwater applications.

AB - Aerophilic surfaces immersed underwater trap films of air known as plastrons. Plastrons have typically been considered impractical for underwater engineering applications due to their metastable performance. Here, we describe aerophilic titanium alloy (Ti) surfaces with extended plastron lifetimes that are conserved for months underwater. Long-term stability is achieved by the formation of highly rough hierarchically structured surfaces via electrochemical anodization combined with a low-surface-energy coating produced by a fluorinated surfactant. Aerophilic Ti surfaces drastically reduce blood adhesion and, when submerged in water, prevent adhesion of bacteria and marine organisms such as barnacles and mussels. Overall, we demonstrate a general strategy to achieve the long-term stability of plastrons on aerophilic surfaces for previously unattainable underwater applications.

UR - https://www.scopus.com/pages/publications/85171465496

U2 - 10.1038/s41563-023-01670-6

DO - 10.1038/s41563-023-01670-6

M3 - Article

AN - SCOPUS:85171465496

SN - 1476-1122

VL - 22

SP - 1548

EP - 1555

JO - Nature Materials

JF - Nature Materials

IS - 12

ER -

Long-term stability of aerophilic metallic surfaces underwater

Abstrakti

Rahoitus

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

Laitteet

Lehtileikkeet

Siteeraa tätä