TY - JOUR
T1 - Investigation of the dependence of pe,ped on ne,sep in JET H-Mode plasmas using integrated JETTO-MISHKA-FRANTIC simulations
AU - Simpson, J.
AU - Moulton, D.
AU - Giroud, C.
AU - Groth, M.
AU - Horvath, L.
AU - Casson, F. J.
AU - Kochl, F.
AU - Frassinetti, L.
AU - Corrigan, G.
AU - Saarelma, S.
AU - Garzotti, L.
AU - Gahle, D. S.
AU - Chankin, A.
AU - JET Contributors
N1 - Funding Information:
This work has been carried out within the framework of the EUROfusion Consortium, funded by the European Union via the Euratom Research and Training Programme (Grant Agreement No 101052200 — EUROfusion). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Commission. Neither the European Union nor the European Commission can be held responsible for them. (Please mind the addendum 2019–2020)
| openaire: EC/HE/101052200/EU//EUROfusion
PY - 2023/3
Y1 - 2023/3
N2 - Experimentally, it has been observed in high-confinement (H-Mode) plasmas with Edge Localised Modes (ELMs) on JET that the pressure pedestal (pe,ped) is degraded by approximately a factor of two when there is a change in electron separatrix density, ne,sep, from 1−4×1019m−3. Previous work using the pedestal stability code EUROPED, has been able to predict the degradation of pe,ped but only for ne,sep≤1.5×1019m−3. In this work, we apply a coupled code JETTO-MISHKA-FRANTIC, to self-consistently predict the transport in the pedestal region and neutral source with varying separatrix conditions. The code feeds back on the transport in the pedestal region to achieve profiles that are marginally stable to ideal MHD modes (continuous ELM model in JETTO). When accounting for the change in electron separatrix temperature (Te,sep), ion separatrix temperature (Ti,sep) and the poloidally integrated neutral flux crossing the separatrix (Γsep,neut) as it changes with ne,sep (according to a scan in ne,sep in the edge code EDGE2D-EIRENE), no degradation in pe,ped was observed in JETTO-MISHKA-FRANTIC in contrast to experiment. Instead, an increase in pe,ped with ne,sep was observed which is driven by an increasing density pedestal (ne,ped). Within the presented JETTO-MISHKA-FRANTIC simulations, changing the pedestal width by a factor of two and a half in normalised poloidal flux (ψn) resulted in an approximately 40% degradation in pe,ped for ne,sep=1−3×1019m−3. This change in pedestal width was not supported by experimental data. A scan in the ratio of particle and energy transport in the pedestal (D/χ) was found to have a negligible effect on pe,ped. Qualitative agreement between JETTO-MISHKA-FRANTIC with EUROPED was found when the input density profiles are identical.
AB - Experimentally, it has been observed in high-confinement (H-Mode) plasmas with Edge Localised Modes (ELMs) on JET that the pressure pedestal (pe,ped) is degraded by approximately a factor of two when there is a change in electron separatrix density, ne,sep, from 1−4×1019m−3. Previous work using the pedestal stability code EUROPED, has been able to predict the degradation of pe,ped but only for ne,sep≤1.5×1019m−3. In this work, we apply a coupled code JETTO-MISHKA-FRANTIC, to self-consistently predict the transport in the pedestal region and neutral source with varying separatrix conditions. The code feeds back on the transport in the pedestal region to achieve profiles that are marginally stable to ideal MHD modes (continuous ELM model in JETTO). When accounting for the change in electron separatrix temperature (Te,sep), ion separatrix temperature (Ti,sep) and the poloidally integrated neutral flux crossing the separatrix (Γsep,neut) as it changes with ne,sep (according to a scan in ne,sep in the edge code EDGE2D-EIRENE), no degradation in pe,ped was observed in JETTO-MISHKA-FRANTIC in contrast to experiment. Instead, an increase in pe,ped with ne,sep was observed which is driven by an increasing density pedestal (ne,ped). Within the presented JETTO-MISHKA-FRANTIC simulations, changing the pedestal width by a factor of two and a half in normalised poloidal flux (ψn) resulted in an approximately 40% degradation in pe,ped for ne,sep=1−3×1019m−3. This change in pedestal width was not supported by experimental data. A scan in the ratio of particle and energy transport in the pedestal (D/χ) was found to have a negligible effect on pe,ped. Qualitative agreement between JETTO-MISHKA-FRANTIC with EUROPED was found when the input density profiles are identical.
KW - Core edge integration
KW - EPED
KW - JINTRAC
KW - Pedestal stability
KW - Pressure pedestal
UR - http://www.scopus.com/inward/record.url?scp=85147539992&partnerID=8YFLogxK
U2 - 10.1016/j.nme.2023.101365
DO - 10.1016/j.nme.2023.101365
M3 - Article
AN - SCOPUS:85147539992
SN - 2352-1791
VL - 34
JO - Nuclear Materials and Energy
JF - Nuclear Materials and Energy
M1 - 101365
ER -