Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3

J. Gandra; D. Pereira; R.M. Miranda; P. Vilaça

doi:10.1016/j.procir.2013.05.058

Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3

J. Gandra, D. Pereira, R.M. Miranda, P. Vilaça

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference contribution › Scientific › vertaisarvioitu

53 Sitaatiot (Scopus)

305 Lataukset (Pure)

Abstrakti

Friction Surfacing is a solid state coating technique with applications in hardfacing, corrosion protection and repair. Since it doesn’t require the fusion of the materials involved, it is suitable to join aluminium alloys while avoiding several of their processing difficulties. The present study addresses the deposition of AA 6082-T6 coatings on AA 2024-T3 substrates, while focusing on the effect of process parameters, such as, axial force, rotation and travel speed. Sound aluminium coatings were produced with limited intermetallic formation at bonding interface. It was observed that low travel and rotation speeds contribute to an increase of coating thickness and width. Bonding at coating edges deteriorates for faster travel speeds. The axial force is determinant in achieving a fully bonded interface.

Alkuperäiskieli	Englanti
Otsikko	46th CIRP Conference on Manufacturing Systems, Setúbal, Portugal, 29-30 May 2013
Kustantaja	Elsevier
Sivut	341–346
DOI - pysyväislinkit	https://doi.org/10.1016/j.procir.2013.05.058
Tila	Julkaistu - 2013
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisuussa
Tapahtuma	CIRP Conference on Manufacturing Systems - Setubal, Portugali Kesto: 29 toukok. 2013 → 30 toukok. 2013 Konferenssinumero: 46

Julkaisusarja

Nimi	Procedia CIRP
Kustantaja	Elsevier
Vuosikerta	7
ISSN (elektroninen)	2212-8271

Conference

Conference	CIRP Conference on Manufacturing Systems
Lyhennettä	CIRP-CMS
Maa/Alue	Portugali
Kaupunki	Setubal
Ajanjakso	29/05/2013 → 30/05/2013

Pääsy asiakirjaan

10.1016/j.procir.2013.05.058

1-s2.0-S2212827113002655-mainFinal published version, 1,08 MBLisenssi: CC BY-NC-ND

OpenUrl-saatavuus

Koko teksti

Siteeraa tätä

@inproceedings{bfd1766b2a214dd6a7e30ceb4452f404,

title = "Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3",

abstract = "Friction Surfacing is a solid state coating technique with applications in hardfacing, corrosion protection and repair. Since it doesn{\textquoteright}t require the fusion of the materials involved, it is suitable to join aluminium alloys while avoiding several of their processing difficulties. The present study addresses the deposition of AA 6082-T6 coatings on AA 2024-T3 substrates, while focusing on the effect of process parameters, such as, axial force, rotation and travel speed. Sound aluminium coatings were produced with limited intermetallic formation at bonding interface. It was observed that low travel and rotation speeds contribute to an increase of coating thickness and width. Bonding at coating edges deteriorates for faster travel speeds. The axial force is determinant in achieving a fully bonded interface.",

keywords = "Friction surfacing, Aluminium, AA 6082-T6, AA 2024-T3",

author = "J. Gandra and D. Pereira and R.M. Miranda and P. Vila{\c c}a",

note = "VK: T20309; CIRP Conference on Manufacturing Systems , CIRP-CMS ; Conference date: 29-05-2013 Through 30-05-2013",

year = "2013",

doi = "10.1016/j.procir.2013.05.058",

language = "English",

series = "Procedia CIRP",

publisher = "Elsevier",

pages = "341–346",

booktitle = "46th CIRP Conference on Manufacturing Systems, Set{\'u}bal, Portugal, 29-30 May 2013",

address = "Netherlands",

}

Gandra, J, Pereira, D, Miranda, RM & Vilaça, P 2013, Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3. julkaisussa 46th CIRP Conference on Manufacturing Systems, Setúbal, Portugal, 29-30 May 2013. Procedia CIRP, Vuosikerta 7, Elsevier, Sivut 341–346, CIRP Conference on Manufacturing Systems , Setubal, Portugali, 29/05/2013. https://doi.org/10.1016/j.procir.2013.05.058

Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3. / Gandra, J.; Pereira, D.; Miranda, R.M. et al.
46th CIRP Conference on Manufacturing Systems, Setúbal, Portugal, 29-30 May 2013. Elsevier, 2013. s. 341–346 (Procedia CIRP; Vuosikerta 7).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference contribution › Scientific › vertaisarvioitu

TY - GEN

T1 - Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3

AU - Gandra, J.

AU - Pereira, D.

AU - Miranda, R.M.

AU - Vilaça, P.

N1 - Conference code: 46

PY - 2013

Y1 - 2013

N2 - Friction Surfacing is a solid state coating technique with applications in hardfacing, corrosion protection and repair. Since it doesn’t require the fusion of the materials involved, it is suitable to join aluminium alloys while avoiding several of their processing difficulties. The present study addresses the deposition of AA 6082-T6 coatings on AA 2024-T3 substrates, while focusing on the effect of process parameters, such as, axial force, rotation and travel speed. Sound aluminium coatings were produced with limited intermetallic formation at bonding interface. It was observed that low travel and rotation speeds contribute to an increase of coating thickness and width. Bonding at coating edges deteriorates for faster travel speeds. The axial force is determinant in achieving a fully bonded interface.

AB - Friction Surfacing is a solid state coating technique with applications in hardfacing, corrosion protection and repair. Since it doesn’t require the fusion of the materials involved, it is suitable to join aluminium alloys while avoiding several of their processing difficulties. The present study addresses the deposition of AA 6082-T6 coatings on AA 2024-T3 substrates, while focusing on the effect of process parameters, such as, axial force, rotation and travel speed. Sound aluminium coatings were produced with limited intermetallic formation at bonding interface. It was observed that low travel and rotation speeds contribute to an increase of coating thickness and width. Bonding at coating edges deteriorates for faster travel speeds. The axial force is determinant in achieving a fully bonded interface.

KW - Friction surfacing

KW - Aluminium

KW - AA 6082-T6

KW - AA 2024-T3

U2 - 10.1016/j.procir.2013.05.058

DO - 10.1016/j.procir.2013.05.058

M3 - Conference contribution

T3 - Procedia CIRP

SP - 341

EP - 346

BT - 46th CIRP Conference on Manufacturing Systems, Setúbal, Portugal, 29-30 May 2013

PB - Elsevier

T2 - CIRP Conference on Manufacturing Systems

Y2 - 29 May 2013 through 30 May 2013

ER -

Influence of process parameters in the friction surfacing of AA 6082-T6 over AA 2024-T3

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

OpenUrl-saatavuus

Sormenjälki

Siteeraa tätä