Influence of plasma parameters on the properties of ultrathin Al2O3 films prepared by plasma enhanced atomic layer deposition below 100 °c for moisture barrier applications

Zhen Zhu, Perttu Sippola, Harri Lipsanen, Hele Savin, Saoussen Merdes

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

13 Sitaatiot (Scopus)
162 Lataukset (Pure)

Abstrakti

We report the effect of plasma parameters on the properties of ultrathin Al2O3 films prepared by plasma enhanced atomic layer deposition for moisture barrier applications. The Al2O3 films were grown at 90 °C using trimethylaluminum and O2 plasma as precursors. Plasma power, exposure time and O2 concentration are found to influence the growth behavior, composition and density of ultrathin Al2O3 films. Plasma power ≥ 100 W leads to lower impurity levels and higher mass densities of ∼2.85 g•cm-3. The optimum plasma parameters for our process, a plasma power of 100 W and an exposure time of 3 s, reveal a good water vapor transmission rate of 5 × 10-3 g•m-2•day-1 for polyethylene naphthalate substrates coated with 4 nm-thick Al2O3 films.

AlkuperäiskieliEnglanti
Artikkeli125502
JulkaisuJapanese Journal of Applied Physics
Vuosikerta57
Numero12
DOI - pysyväislinkit
TilaJulkaistu - 1 jouluk. 2018
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki

Sukella tutkimusaiheisiin 'Influence of plasma parameters on the properties of ultrathin Al2O3 films prepared by plasma enhanced atomic layer deposition below 100 °c for moisture barrier applications'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä