Importance of process design on carbon footprint from drinking water treatment by enhanced coagulation-filtration

There are several process design options for enhanced coagulation-filtration in drinking water treatment plants (DWTPs). This study compares the carbon footprint and economic impact of two common process designs based on enhanced coagulation- filtration with pH, Ca, and alkalinity adjustment for corrosion control. The process designs are direct filtration (DF) using Al coagulant with limewater (DF-Al) and contact filtration (CF) using Fe coagulant with alkaline filter layers (CF-Fe). The operational data are retrieved from full-scale DWTPs. The results show that the carbon footprint from operations is five times larger for the DF-Al compared to the CF-Fe. Operational costs covering chemicals and energy are almost 30% higher for the DF-Al. Simplified
material intensity estimations for the construction phase show that the carbon footprint and investment cost increase with increasing process area, which are larger for the DF-Al. Therefore, to reduce environmental impacts and costs, the design of drinking water treatment processes should be carefully considered even for very similar processes. The results should motivate both water professionals and decision-makers to include a carbon footprint evaluation as a routine step in the DWTP selection and design phases.