Hydraulic Energy Recovery System Utilizing a Thermally Regenerative Hydraulic Accumulator Implemented to a Reach Truck

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa

Tutkijat

Organisaatiot

Kuvaus

The implementation of an energy recovery system for retreiving otherways wasted energy is an effective method for reducing the overall energy consumption of a mobile machine. In a fork lift, there are two subsystems that can be effectively modified for recovering energy. These are the driveline and the lift/lower function of the mast. This study focuses on the latter by studying a recovery system whose main component is a hydraulic transformer consisting of a hydraulic motor, a variable displacement pump and an induction motor. Since the flow rate/pressure -ratio can be modified, the utilization of the hydraulic transformer enables downsizing of the accumulator volume. However, the decrease of the gas volume leads to an increase in the compression ratio of the accumulator, which in terms leads to higher gas temperatures after charging and consequently to higher thermal losses during holding phase. In order to reduce these losses, a thermally regenerative unit was implemented to the gas volume of an accumulator to reduce the temperature build up during charging. In this study, the effect of improving the thermal characteristics of the accumulator to the efficiency of the whole energy recovery system is investigated by means of measurements.

Yksityiskohdat

AlkuperäiskieliEnglanti
OtsikkoProceedings of the 10th International Conference on Fluid Power (IFK)
Alaotsikko8 - 10 March 2016, Dresden, Germany
TilaJulkaistu - 2016
OKM-julkaisutyyppiD3 Ammatillisen konferenssin julkaisusarja
TapahtumaInternational Fluid Power Conference - Dresden, Saksa
Kesto: 8 maaliskuuta 201610 maaliskuuta 2016
Konferenssinumero: 10

Julkaisusarja

NimiInternational Fluid Power Conference

Conference

ConferenceInternational Fluid Power Conference
MaaSaksa
Ajanjakso08/03/201610/03/2016

ID: 8993411