Greenhouse Gas Accounting for Manufacturers

Jaakko Peltokorpi; Saija Vatanen; Christoph H. Glock

doi:10.1007/978-3-031-38165-2_105

Greenhouse Gas Accounting for Manufacturers

Jaakko Peltokorpi^*, Saija Vatanen, Christoph H. Glock

^*Tämän työn vastaava kirjoittaja

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

7 Lataukset (Pure)

Abstrakti

Legislation and stakeholders increasingly urge European original equipment manufacturers (OEM) to disclose and reduce greenhouse gas (GHG) emissions of their operations and supply chains. However, a sector-specific reporting standard is not yet available for manufacturing industry. This study takes a stepwise approach to identify the GHG emission sources and intensities in further detail. The primary data of a case company, a Finnish gear manufacturer, was supplemented with secondary data from the literature. Using the proposed approach, an OEM share of the total emissions was estimated at 15%. Evaluating emissions of specific suppliers is more difficult as there is little access to the suppliers’ data. The study gives insights for the manufacturers on how to get started with GHG emissions accounting in the factories and supply chains and to show their responsible actions in the climate change mitigation.

Alkuperäiskieli	Englanti
Otsikko	Flexible Automation and Intelligent Manufacturing
Alaotsikko	Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023
Toimittajat	Francisco J. Silva, Luís Pinto Ferreira, José Carlos Sá, Maria Teresa Pereira, Carla M.A. Pinto
Kustantaja	Springer
Sivut	912-919
Sivumäärä	8
ISBN (elektroninen)	978-3-031-38165-2
ISBN (painettu)	978-3-031-38164-5
DOI - pysyväislinkit	https://doi.org/10.1007/978-3-031-38165-2_105
Tila	Julkaistu - 2024
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Flexible Automation and Intelligent Manufacturing - Porto, Portugali Kesto: 18 kesäk. 2023 → 22 kesäk. 2023 Konferenssinumero: 32

Julkaisusarja

Nimi	Lecture Notes in Mechanical Engineering
ISSN (painettu)	2195-4356
ISSN (elektroninen)	2195-4364

Conference

Conference	International Conference on Flexible Automation and Intelligent Manufacturing
Lyhennettä	FAIM
Maa/Alue	Portugali
Kaupunki	Porto
Ajanjakso	18/06/2023 → 22/06/2023

YK:n kestävän kehityksen tavoitteet

Tämä tuotos edistää seuraavia kestävän kehityksen tavoitteita:

Pääsy asiakirjaan

10.1007/978-3-031-38165-2_105

Peltokorpi_Vatanen_Glock_Greenhouse_Gas_Accounting_for_Manufacturers_FAIM_2023Accepted author manuscript, 659 KB

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

GREEF: Green Factory towards carbon neutral production, GREEF
Niemi, E. (Vastuullinen tutkija), Häkkinen, K. (Projektin jäsen), Partanen, J. (Projektin jäsen), Peltokorpi, J. (Projektin jäsen), Orkas, J. (Projektin jäsen) & Salmi, M. (Projektin jäsen)
01/05/2020 → 31/12/2020
Projekti: Business Finland: Other research funding

Siteeraa tätä

Peltokorpi, J., Vatanen, S., & Glock, C. H. (2024). Greenhouse Gas Accounting for Manufacturers. teoksessa F. J. Silva, L. P. Ferreira, J. C. Sá, M. T. Pereira, & C. M. A. Pinto (Toimittajat), Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023 (Sivut 912-919). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-031-38165-2_105

Peltokorpi, Jaakko ; Vatanen, Saija ; Glock, Christoph H. / Greenhouse Gas Accounting for Manufacturers. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023. Toimittaja / Francisco J. Silva ; Luís Pinto Ferreira ; José Carlos Sá ; Maria Teresa Pereira ; Carla M.A. Pinto. Springer, 2024. Sivut 912-919 (Lecture Notes in Mechanical Engineering).

@inproceedings{26912bef2bef4d25b87768eb20be5c4f,

title = "Greenhouse Gas Accounting for Manufacturers",

abstract = "Legislation and stakeholders increasingly urge European original equipment manufacturers (OEM) to disclose and reduce greenhouse gas (GHG) emissions of their operations and supply chains. However, a sector-specific reporting standard is not yet available for manufacturing industry. This study takes a stepwise approach to identify the GHG emission sources and intensities in further detail. The primary data of a case company, a Finnish gear manufacturer, was supplemented with secondary data from the literature. Using the proposed approach, an OEM share of the total emissions was estimated at 15%. Evaluating emissions of specific suppliers is more difficult as there is little access to the suppliers{\textquoteright} data. The study gives insights for the manufacturers on how to get started with GHG emissions accounting in the factories and supply chains and to show their responsible actions in the climate change mitigation.",

keywords = "Accounting, Factory, Gear, GHG, Greenhouse gas, Manufacturing, Supply chain",

author = "Jaakko Peltokorpi and Saija Vatanen and Glock, {Christoph H.}",

note = "Funding Information: The work was carried out in the Green Factory towards carbon neutral production (GREEF) co-innovation project funded by Business Finland. Publisher Copyright: {\textcopyright} 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.; International Conference on Flexible Automation and Intelligent Manufacturing, FAIM ; Conference date: 18-06-2023 Through 22-06-2023",

year = "2024",

doi = "10.1007/978-3-031-38165-2_105",

language = "English",

isbn = "978-3-031-38164-5",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer",

pages = "912--919",

editor = "Silva, {Francisco J.} and Ferreira, {Lu{\'i}s Pinto} and S{\'a}, {Jos{\'e} Carlos} and Pereira, {Maria Teresa} and Pinto, {Carla M.A.}",

booktitle = "Flexible Automation and Intelligent Manufacturing",

address = "Germany",

}

Peltokorpi, J, Vatanen, S & Glock, CH 2024, Greenhouse Gas Accounting for Manufacturers. julkaisussa FJ Silva, LP Ferreira, JC Sá, MT Pereira & CMA Pinto (toim), Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023. Lecture Notes in Mechanical Engineering, Springer, Sivut 912-919, International Conference on Flexible Automation and Intelligent Manufacturing, Porto, Portugali, 18/06/2023. https://doi.org/10.1007/978-3-031-38165-2_105

Greenhouse Gas Accounting for Manufacturers. / Peltokorpi, Jaakko; Vatanen, Saija; Glock, Christoph H.
Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023. toim. / Francisco J. Silva; Luís Pinto Ferreira; José Carlos Sá; Maria Teresa Pereira; Carla M.A. Pinto. Springer, 2024. s. 912-919 (Lecture Notes in Mechanical Engineering).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Greenhouse Gas Accounting for Manufacturers

AU - Peltokorpi, Jaakko

AU - Vatanen, Saija

AU - Glock, Christoph H.

N1 - Conference code: 32

PY - 2024

Y1 - 2024

N2 - Legislation and stakeholders increasingly urge European original equipment manufacturers (OEM) to disclose and reduce greenhouse gas (GHG) emissions of their operations and supply chains. However, a sector-specific reporting standard is not yet available for manufacturing industry. This study takes a stepwise approach to identify the GHG emission sources and intensities in further detail. The primary data of a case company, a Finnish gear manufacturer, was supplemented with secondary data from the literature. Using the proposed approach, an OEM share of the total emissions was estimated at 15%. Evaluating emissions of specific suppliers is more difficult as there is little access to the suppliers’ data. The study gives insights for the manufacturers on how to get started with GHG emissions accounting in the factories and supply chains and to show their responsible actions in the climate change mitigation.

AB - Legislation and stakeholders increasingly urge European original equipment manufacturers (OEM) to disclose and reduce greenhouse gas (GHG) emissions of their operations and supply chains. However, a sector-specific reporting standard is not yet available for manufacturing industry. This study takes a stepwise approach to identify the GHG emission sources and intensities in further detail. The primary data of a case company, a Finnish gear manufacturer, was supplemented with secondary data from the literature. Using the proposed approach, an OEM share of the total emissions was estimated at 15%. Evaluating emissions of specific suppliers is more difficult as there is little access to the suppliers’ data. The study gives insights for the manufacturers on how to get started with GHG emissions accounting in the factories and supply chains and to show their responsible actions in the climate change mitigation.

KW - Accounting

KW - Factory

KW - Gear

KW - GHG

KW - Greenhouse gas

KW - Manufacturing

KW - Supply chain

UR - http://www.scopus.com/inward/record.url?scp=85172734335&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-38165-2_105

DO - 10.1007/978-3-031-38165-2_105

M3 - Conference article in proceedings

AN - SCOPUS:85172734335

SN - 978-3-031-38164-5

T3 - Lecture Notes in Mechanical Engineering

SP - 912

EP - 919

BT - Flexible Automation and Intelligent Manufacturing

A2 - Silva, Francisco J.

A2 - Ferreira, Luís Pinto

A2 - Sá, José Carlos

A2 - Pereira, Maria Teresa

A2 - Pinto, Carla M.A.

PB - Springer

T2 - International Conference on Flexible Automation and Intelligent Manufacturing

Y2 - 18 June 2023 through 22 June 2023

ER -

Peltokorpi J, Vatanen S, Glock CH. Greenhouse Gas Accounting for Manufacturers. julkaisussa Silva FJ, Ferreira LP, Sá JC, Pereira MT, Pinto CMA, toimittajat, Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems - Proceedings of FAIM 2023. Springer. 2024. s. 912-919. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-031-38165-2_105

Greenhouse Gas Accounting for Manufacturers

Abstrakti

Julkaisusarja

Conference

YK:n kestävän kehityksen tavoitteet

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

GREEF: Green Factory towards carbon neutral production, GREEF

Siteeraa tätä