GM limiting curve for operation in brackish water

Petri Pennanen, Daniel Lindroth, Pekka Ruponen

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference article in proceedingsScientificvertaisarvioitu


Onboard a passenger or dry cargo ship, the statutory compliance related to intact and damage stability criteria is most conveniently determined by using GM limiting curves. The actual GM of the loading condition is compared to a required value, read from a curve for the actual draught/trim commbination. The GM limit values are calculated for the full operating range of draught and trim. However, in practice the GM limiting curves do not cover draughts greater than the deepest subdivision draught or the maximum sea water draught of the ship. When the ship is operated on a sea area of brackish water, like the Baltic Sea, there is no common understanding on how to use the GM limiting curves, and it is not clear whether the ship is allowed to submerge the Plimsoll mark. Furthermore, the definition of the required GM value is not clear since the limit curve does not exceed to that draught. The problem affects many ships built according to different editions of the SOLAS. The authorities and classification societies have different approaches, but a common and well-grounded way is needed. The problems are highlighted by presenting real life practical examples.
OtsikkoProceedings of the 17th International Ship Stability Workshop
ToimittajatPekka Ruponen
KustantajaAalto University School of Engineering
ISBN (elektroninen)9789526037684
ISBN (painettu)9789526037677
TilaJulkaistu - kesäk. 2019
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisussa
TapahtumaInternational Ship Stability Workshop - Helsinki, Suomi
Kesto: 10 kesäk. 201912 kesäk. 2019
Konferenssinumero: 17


WorkshopInternational Ship Stability Workshop


Sukella tutkimusaiheisiin 'GM limiting curve for operation in brackish water'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä