Geoid Validation on the Baltic Sea Using Ship-borne GNSS Data

Maaria Nordman*, Jaakko Kuokkanen, Mirjam Bilker-Koivula, Hannu Koivula, Pasi Häkli, Sonja Lahtinen

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

4 Sitaatiot (Scopus)

Abstrakti

We studied geoid validation using ship-borne global navigation satellite systems (GNSS) on the Baltic Sea. We obtained geoid heights by combining GNSS–inertial measurement unit observations, tide gauge data, and a physical sea model. We used two different geoid models available for the area. The ship route was divided into lines and the lines were processed separately. The GNSS results were reduced to the sea surface using attitude and draft parameters available from the vessel during the campaign. For these lines, the residual errors between ellipsoidal height versus geoid height and absolute dynamic topography varied between 0 and 15 cm, grand mean being 2 cm. The mean standard deviations of the original time series were approximately 11 cm and reduced to below 5 cm for the time series filtered with 10 min moving average. We showed that it is possible to recover geoid heights from the GNSS observations at sea and validate existing geoid models in a well-controlled area.

AlkuperäiskieliEnglanti
Sivut457-476
Sivumäärä20
JulkaisuMARINE GEODESY
Vuosikerta41
Numero5
DOI - pysyväislinkit
TilaJulkaistu - 3 syyskuuta 2018
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki

Sukella tutkimusaiheisiin 'Geoid Validation on the Baltic Sea Using Ship-borne GNSS Data'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä