Furfural production from xylose in a bi-phasic set-up

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussavertaisarvioitu

Tutkijat

Organisaatiot

  • Polytechnic University of Catalonia

Kuvaus

The production of furfural (FUR) from xylose was carried out using a biphasic batch reaction system. Isophorone and 2-methytetrahydrofuran (MTHF) have been used to extract FUR and enhance overall furfural yield by limiting its degradation to humins. The effect of time, temperature, and organic to aqueous ratio on xylose conversion and FUR yield were investigated. Experiments conducted at two temperatures (170 and 190 °C) were investigated in a stirred microwave-assisted batch reactor, which established the optimal conditions to obtain the highest FUR yield. The maximum FUR yields obtained from xylose were 82 mol% when using MTHF in 180 min (at 190 °C) and 43 mol% when using isophorone in 180 min (at 190 °C) with an aqueous to organic phase ratio of 5:1.

Yksityiskohdat

AlkuperäiskieliEnglanti
OtsikkoISWFPC 2017 - 19th International Symposium on Wood, Fibre and Pulping Chemistry
ToimittajatJorge L. Colodette, Fernando J.B. Gomes
TilaJulkaistu - 30 elokuuta 2017
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaInternational Symposium on Wood, Fibre and Pulping Chemistry - Arraial d'Ajuda Eco Resort, Porto Seguro, BA, Brazil, Porto Seguro, Brasilia
Kesto: 30 elokuuta 20171 syyskuuta 2017
Konferenssinumero: 19
http://iswfpc2017.com/

Conference

ConferenceInternational Symposium on Wood, Fibre and Pulping Chemistry
LyhennettäISWFPC 2017
MaaBrasilia
KaupunkiPorto Seguro
Ajanjakso30/08/201701/09/2017
www-osoite

Lataa tilasto

Ei tietoja saatavilla

ID: 14964241