This article concerns the functionalization of polypropylene (PP) with oxazoline functionality by melt free radical grafting along with a low degree of degradation of PP in a batch mixer. A low volatile oxazoline, ricinoloxazoline maleinate (OXA), was used as the monomer. The grafting yield of OXA ranged from about 0.5 phr up to 1.5 phr (grams per 100 grams of PP) when its initial concentration and that of the peroxide ranged from 1.5 to 6.0 phr and 0.1 to 0.7 phr, respectively. The corresponding conversion of OXA to grafted OXA ranged from about 15 to 50%. Addition of styrene (St) as the comonmer did not enhance the grafting yield of OXA but markedly reduced the PP degradation. Also, little homo-and/or copolymers of OXA and/or St were found in the grafting system. This agrees with our finding that OXA and St did not copolymerize easily The potential of using an OXA modified PP (PP-g-OXA) as the compatibilizer precursor in PP/PBT blends was examined aa well. The presence of PP-g-OXA reduced the particle size of the dispersed phase (PBT) along with improved cohesion between the PP and PBT phases. This is consistent with a model kinetic study, which showed that the reaction between oxazoline and carboxylic functionalities was very fast.
|Julkaisu||Journal of Applied Polymer Science|
|DOI - pysyväislinkit|
|Tila||Julkaistu - 1 elokuuta 1996|
|OKM-julkaisutyyppi||A1 Julkaistu artikkeli, soviteltu|
- functionalized polypropylene
- polymer blends