Freeze Bond Failure Under Tensile Stress due to Flexural Loading

Andrii Murdza; Arttu Polojärvi; Erland M. Schulson; Carl E. Renshaw

Freeze Bond Failure Under Tensile Stress due to Flexural Loading

Andrii Murdza, Arttu Polojärvi, Erland M. Schulson, Carl E. Renshaw

Energia- ja konetekniikan laitos

Dartmouth College

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

31 Lataukset (Pure)

Abstrakti

The flexural strength of ice plates bonded together by freezing water (freeze-bond) is investigated in this work. Freshwater S2 columnar grained ice was used as a parent material to be bonded; water of salinities ranging from 0 to 35 ppt was used to generate bonds. Freezing occurred in air at temperatures ranging from -3 to -25 °C and under compression of about 4 kPa for periods of time varying from 0.5 to ~100 hrs. The bond strength was measured under 4-point bending. The study revealed that the flexural strength of bonded ice decreases with an increase in both salinity and temperature. The flexural strength of freshwater bonds is similar or higher than the flexural strength of intact parent material after less than 0.5 hrs freezing. The strength of the saline ice bonds levels off within ~6-12 hours of freezing.

Alkuperäiskieli	Englanti
Otsikko	Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21)
Kustantaja	Luleå tekniska universitet
Sivumäärä	10
ISBN (elektroninen)	9781713841005
Tila	Julkaistu - 2021
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Port and Ocean Engineering under Arctic Conditions - Online, Moscow, Venäjä Kesto: 14 kesäk. 2021 → 18 kesäk. 2021 Konferenssinumero: 26

Julkaisusarja

Nimi	Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions
ISSN (elektroninen)	2077-7841

Conference

Conference	International Conference on Port and Ocean Engineering under Arctic Conditions
Lyhennettä	POAC
Maa/Alue	Venäjä
Kaupunki	Moscow
Ajanjakso	14/06/2021 → 18/06/2021

Pääsy asiakirjaan

POAC21-057Final published version, 682 KB

Muut tiedostot ja linkit

https://www.poac.com/PapersOnline.html

ICEBES: Jäälohkareiden Rikkoutuminen: Kokeet Ja Simulaatiot (ICEBES)
Polojärvi, A. (Vastuullinen tutkija)
01/09/2017 → 31/08/2021
Projekti: Academy of Finland: Other research funding

Siteeraa tätä

Murdza, A., Polojärvi, A., Schulson, E. M., & Renshaw, C. E. (2021). Freeze Bond Failure Under Tensile Stress due to Flexural Loading. teoksessa Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21) ( Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions). Luleå tekniska universitet.

Murdza, Andrii ; Polojärvi, Arttu ; Schulson, Erland M. et al. / Freeze Bond Failure Under Tensile Stress due to Flexural Loading. Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21). Luleå tekniska universitet, 2021. ( Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions).

@inproceedings{44879e068b0449f4b1e8160ed17895af,

title = "Freeze Bond Failure Under Tensile Stress due to Flexural Loading",

abstract = "The flexural strength of ice plates bonded together by freezing water (freeze-bond) is investigated in this work. Freshwater S2 columnar grained ice was used as a parent material to be bonded; water of salinities ranging from 0 to 35 ppt was used to generate bonds. Freezing occurred in air at temperatures ranging from -3 to -25 °C and under compression of about 4 kPa for periods of time varying from 0.5 to ~100 hrs. The bond strength was measured under 4-point bending. The study revealed that the flexural strength of bonded ice decreases with an increase in both salinity and temperature. The flexural strength of freshwater bonds is similar or higher than the flexural strength of intact parent material after less than 0.5 hrs freezing. The strength of the saline ice bonds levels off within ~6-12 hours of freezing.",

keywords = "Ice mechanics, Flexural strength, Failure, Freeze bond, Rheology",

author = "Andrii Murdza and Arttu Poloj{\"a}rvi and Schulson, {Erland M.} and Renshaw, {Carl E.}",

year = "2021",

language = "English",

series = " Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions",

publisher = "Lule{\aa} tekniska universitet",

booktitle = "Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21)",

address = "Sweden",

note = "International Conference on Port and Ocean Engineering under Arctic Conditions<br/>, POAC ; Conference date: 14-06-2021 Through 18-06-2021",

}

Murdza, A, Polojärvi, A, Schulson, EM & Renshaw, CE 2021, Freeze Bond Failure Under Tensile Stress due to Flexural Loading. julkaisussa Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21). Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions, Luleå tekniska universitet, International Conference on Port and Ocean Engineering under Arctic Conditions
, Moscow, Venäjä, 14/06/2021.

Freeze Bond Failure Under Tensile Stress due to Flexural Loading. / Murdza, Andrii; Polojärvi, Arttu; Schulson, Erland M. et al.
Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21). Luleå tekniska universitet, 2021. ( Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Freeze Bond Failure Under Tensile Stress due to Flexural Loading

AU - Murdza, Andrii

AU - Polojärvi, Arttu

AU - Schulson, Erland M.

AU - Renshaw, Carl E.

N1 - Conference code: 26

PY - 2021

Y1 - 2021

N2 - The flexural strength of ice plates bonded together by freezing water (freeze-bond) is investigated in this work. Freshwater S2 columnar grained ice was used as a parent material to be bonded; water of salinities ranging from 0 to 35 ppt was used to generate bonds. Freezing occurred in air at temperatures ranging from -3 to -25 °C and under compression of about 4 kPa for periods of time varying from 0.5 to ~100 hrs. The bond strength was measured under 4-point bending. The study revealed that the flexural strength of bonded ice decreases with an increase in both salinity and temperature. The flexural strength of freshwater bonds is similar or higher than the flexural strength of intact parent material after less than 0.5 hrs freezing. The strength of the saline ice bonds levels off within ~6-12 hours of freezing.

AB - The flexural strength of ice plates bonded together by freezing water (freeze-bond) is investigated in this work. Freshwater S2 columnar grained ice was used as a parent material to be bonded; water of salinities ranging from 0 to 35 ppt was used to generate bonds. Freezing occurred in air at temperatures ranging from -3 to -25 °C and under compression of about 4 kPa for periods of time varying from 0.5 to ~100 hrs. The bond strength was measured under 4-point bending. The study revealed that the flexural strength of bonded ice decreases with an increase in both salinity and temperature. The flexural strength of freshwater bonds is similar or higher than the flexural strength of intact parent material after less than 0.5 hrs freezing. The strength of the saline ice bonds levels off within ~6-12 hours of freezing.

KW - Ice mechanics

KW - Flexural strength

KW - Failure

KW - Freeze bond

KW - Rheology

UR - https://www.poac.com/PapersOnline.html

M3 - Conference article in proceedings

T3 - Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions

BT - Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21)

PB - Luleå tekniska universitet

T2 - International Conference on Port and Ocean Engineering under Arctic Conditions<br/>

Y2 - 14 June 2021 through 18 June 2021

ER -

Murdza A, Polojärvi A, Schulson EM, Renshaw CE. Freeze Bond Failure Under Tensile Stress due to Flexural Loading. julkaisussa Proceedings of the 26th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'21). Luleå tekniska universitet. 2021. ( Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions).

Freeze Bond Failure Under Tensile Stress due to Flexural Loading

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

ICEBES: Jäälohkareiden Rikkoutuminen: Kokeet Ja Simulaatiot (ICEBES)

Siteeraa tätä