Force Estimation in Electromagnetic System Using Augmented Kalman Filter

Rahul Vijaykumar Redekar, Gaurav Kumar, Karuna Kalita, Kari Tammi

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientificvertaisarvioitu

Abstrakti

The analytical modelling and real time estimation of electromagnetic forces brings many challenges and in many situations, it is very difficult to develop an accurate model of force production. The present work describes an estimation of the actual forces generated by an electromagnetic actuator based on augmented Kalman filter.
A cantilever beam with end concentrated mass has been chosen as a vibrating system and an E–shaped laminated core with coils on the middle limb has been chosen as the electromagnetic exciter. The available analytical formulation has been chosen for the calculation of the generated forces which have been corrected using augmented Kalman filter.
The developed experimental setup has a mild steel beam of 150 mm length with a mass of 560 g at its tip and an E shaped lamination core with a stack thickness of 38 mm.
AlkuperäiskieliEnglanti
OtsikkoASME 2017 Gas Turbine India Conference
KustantajaAmerican Society of Mechanical Engineers
Sivumäärä8
Vuosikerta2
ISBN (elektroninen)978-0-7918-5851-6
DOI - pysyväislinkit
TilaJulkaistu - joulukuuta 2017
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaASME Gas Turbine India Conference - Bangalore, Intia
Kesto: 7 joulukuuta 20178 joulukuuta 2017
Konferenssinumero: 5

Conference

ConferenceASME Gas Turbine India Conference
MaaIntia
KaupunkiBangalore
Ajanjakso07/12/201708/12/2017

Sormenjälki Sukella tutkimusaiheisiin 'Force Estimation in Electromagnetic System Using Augmented Kalman Filter'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

  • Siteeraa tätä

    Redekar, R. V., Kumar, G., Kalita, K., & Tammi, K. (2017). Force Estimation in Electromagnetic System Using Augmented Kalman Filter. teoksessa ASME 2017 Gas Turbine India Conference (Vuosikerta 2). [V002T05A009-1] American Society of Mechanical Engineers. https://doi.org/10.1115/GTINDIA2017-4621