Experimental setup for anisotropic thermoelectric transport measurements using MPMS

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

Organisaatiot

Kuvaus

At reduced dimensions the electrical transport properties of materials often depend on the measurement direction. Here we report on a measurement setup designed on the manual insertion utility probe (MIUP) of the Quantum Design's magnetic property measurement system (MPMS) to measure anisotropic transport properties in the temperature range of 10-400 K and magnetic fields up to 5 Tesla. The setup is capable of measuring the Seebeck coefficient and electrical resistivity both along and perpendicular to the applied magnetic field. The Seebeck measurement is based on the differential measurement technique; the four-probe electrical resistivity measurement can easily be performed on the opposite side of the setup. The setup consists of a small copper cube (5 × 5 × 5 mm 3 ) fitted with diagonally cut electrically insulated square strips. The strips are fitted with copper-constantan thermocouple in differential arrangement for the temperature-gradient (ΔT) measurement and symmetrically arranged surface mount (SM) resistors to create the ΔT across the sample. The cube can be rotated to alter the direction of the applied magnetic field on the sample. We demonstrate the directional dependence of the measured transport properties for a normal platinum wire and for single crystal flakes of CuCr 2 Se 4 .

Yksityiskohdat

AlkuperäiskieliEnglanti
Artikkeli025602
Sivumäärä7
JulkaisuMeasurement Science and Technology
Vuosikerta30
Numero2
TilaJulkaistu - 1 helmikuuta 2019
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Lataa tilasto

Ei tietoja saatavilla

ID: 31437430