Experimental and theoretical study of interlaminar eddy current loss in laminated cores

Sahas Bikram Shah, Paavo Rasilo, Anouar Belahcen, Antero Arkkio

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientific

2 Sitaatiot (Scopus)
165 Lataukset (Pure)

Abstrakti

Insulation failure between the electrical sheets of electrical machines or transformers might occur due to the burrs formed during the cutting process. Together with welding seams or screws used to hold the stack together, the burrs provide a conducting path for eddy currents. In this paper, equivalent conductivities of the EI core with and without interlaminar contacts are determined using 3D finite element computations and measurements. The core loss of the EI core is measured, and the eddy current loss is segregated from the measurements. Based on the acquired eddy current loss, the equivalent conductivities are determined using an iterative approach. In the case of interlaminar fault at one limb, eddy current loss coefficient increased by 2% and in the case of interlaminar fault at two limbs, eddy current loss coefficient increased by 2.7% compared to the healthy case.

AlkuperäiskieliEnglanti
OtsikkoProceedings of the 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017
KustantajaIEEE
ISBN (elektroninen)9781538632468
DOI - pysyväislinkit
TilaJulkaistu - 2 lokakuuta 2017
OKM-julkaisutyyppiB3 Ei-soviteltu artikkeli konferenssin julkaisusarjassa
TapahtumaInternational Conference on Electrical Machines and Systems - Sydney, Austraalia
Kesto: 11 elokuuta 201714 elokuuta 2017
Konferenssinumero: 20

Conference

ConferenceInternational Conference on Electrical Machines and Systems
LyhennettäICEM
MaaAustraalia
KaupunkiSydney
Ajanjakso11/08/201714/08/2017

Sormenjälki Sukella tutkimusaiheisiin 'Experimental and theoretical study of interlaminar eddy current loss in laminated cores'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä