Effects of divertor electrical drifts on particle distribution and detachment near the divertor target plate in DIII-D

H. Q. Wang*, J. G. Watkins, H. Y. Guo, M. Groth, A. E. Jarvinen, A. W. Leonard, J. Ren, D. M. Thomas, J. Boedo

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

4 Sitaatiot (Scopus)
1 Lataukset (Pure)

Abstrakti

Strong impacts of drifts on the divertor plasma in-out asymmetry and detachment are demonstrated in DIII-D with an open divertor configuration. For forward toroidal field, BT, i.e., with the ion B × ∇B drift toward the divertor, the particle flux to the inner divertor, as represented by the Langmuir probe measured ion saturation current (Jsat), exhibits a double peak structure, with electron temperature, lower at the inner target. Reversing the BT direction reverses both the radial and poloidal E × B flows, leading to a broad particle flux profile in the outboard scrape-off layer (SOL) with a similar double-peak structure to that observed at the inner target with forward BT. The correlation of a double peak structure with divertor temperature profiles confirms physical coupling between the drift flow and sheath boundary condition and their strong impact on divertor profiles. In addition, under reversed BT conditions, increasing the density flattens the target temperature profile. However, Jsat remains high away from the strike point, rendering it difficult to achieve an "effective"detached plasma, i.e., with effective reduction in both peak heat flux and peak temperature (in the far SOL). In contrast, divertor detachment with a cold and flat temperature profile can be achieved at both target plates with the forward BT.

AlkuperäiskieliEnglanti
Artikkeli052509
Sivumäärä11
JulkaisuPhysics of Plasmas
Vuosikerta28
Numero5
DOI - pysyväislinkit
TilaJulkaistu - 1 toukokuuta 2021
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki

Sukella tutkimusaiheisiin 'Effects of divertor electrical drifts on particle distribution and detachment near the divertor target plate in DIII-D'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä