Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment

Rizwan Ullah; Agbemon Fangnon; Juha Huuki

doi:10.1007/978-3-031-18326-3_4

Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment

Rizwan Ullah^*, Agbemon Fangnon, Juha Huuki

^*Tämän työn vastaava kirjoittaja

Konetekniikan laitos

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference contribution › Scientific › vertaisarvioitu

1 Sitaatiot (Scopus)

21 Lataukset (Pure)

Abstrakti

Ultrasonic burnishing induces beneficial compressive stresses and high surface quality in components with contact as a functional requirement. It was observed in previous work that some burnishing parameters can hinder burnishability of stainless steels. In this research tangential misalignment angles (TMA) for burnishing were varied considering as-supplied and heat-treated stainless steel. Properties such as surface hardness and surface roughness were measured after burnishing process. Electron Backscatter Diffraction was performed to characterize microstructure using Matlab (MTEX) to calculate average grain areas. By changing burnishing parameters, i.e., shaft rotational speed and burnishing tool diameter, it was observed that burnishing was less successful. Nevertheless, significant improvement in burnished surface quality was observed after heat-treatment process. In addition, grain size characterization revealed mean grain area reduction from 26 µm2 for unburnished to 11 µm2 and 3 µm2 for burnished and heat-treated samples respectively. Most importantly this work reveals the enhanced possibility of burnishing stainless steels after heat-treatment with varying tangential misalignment angles.

Alkuperäiskieli	Englanti
Otsikko	Flexible Automation and Intelligent Manufacturing
Alaotsikko	The Human-Data-Technology Nexus - Proceedings of FAIM 2022
Toimittajat	Kyoung-Yun Kim, Leslie Monplaisir, Jeremy Rickli
Kustantaja	Springer
Sivut	38-47
Sivumäärä	10
Vuosikerta	1
ISBN (elektroninen)	978-3-031-18326-3
ISBN (painettu)	978-3-031-18325-6
DOI - pysyväislinkit	https://doi.org/10.1007/978-3-031-18326-3_4
Tila	Julkaistu - 13 lokak. 2022
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisuussa
Tapahtuma	International Conference on Flexible Automation and Intelligent Manufacturing - Detroit, Yhdysvallat Kesto: 19 kesäk. 2022 → 23 kesäk. 2022 Konferenssinumero: 31

Julkaisusarja

Nimi	Lecture notes in mechanical engineering
Kustantaja	Springer
ISSN (painettu)	2195-4356
ISSN (elektroninen)	2195-4364

Conference

Conference	International Conference on Flexible Automation and Intelligent Manufacturing
Lyhennettä	FAIM
Maa/Alue	Yhdysvallat
Kaupunki	Detroit
Ajanjakso	19/06/2022 → 23/06/2022

Pääsy asiakirjaan

10.1007/978-3-031-18326-3_4Lisenssi: CC BY

978-3-031-18326-3_4Final published version, 1,23 MBLisenssi: CC BY

OpenUrl-saatavuus

Koko teksti

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

Siteeraa tätä

Ullah, R., Fangnon, A., & Huuki, J. (2022). Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment. teoksessa K-Y. Kim, L. Monplaisir, & J. Rickli (Toimittajat), Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022 (Vuosikerta 1, Sivut 38-47). (Lecture notes in mechanical engineering). Springer. https://doi.org/10.1007/978-3-031-18326-3_4

Ullah, Rizwan ; Fangnon, Agbemon ; Huuki, Juha. / Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment. Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Toimittaja / Kyoung-Yun Kim ; Leslie Monplaisir ; Jeremy Rickli. Vuosikerta 1 Springer, 2022. Sivut 38-47 (Lecture notes in mechanical engineering).

@inproceedings{f1fcdc4e59194ad2b50c67486ffad4b6,

title = "Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment",

abstract = "Ultrasonic burnishing induces beneficial compressive stresses and high surface quality in components with contact as a functional requirement. It was observed in previous work that some burnishing parameters can hinder burnishability of stainless steels. In this research tangential misalignment angles (TMA) for burnishing were varied considering as-supplied and heat-treated stainless steel. Properties such as surface hardness and surface roughness were measured after burnishing process. Electron Backscatter Diffraction was performed to characterize microstructure using Matlab (MTEX) to calculate average grain areas. By changing burnishing parameters, i.e., shaft rotational speed and burnishing tool diameter, it was observed that burnishing was less successful. Nevertheless, significant improvement in burnished surface quality was observed after heat-treatment process. In addition, grain size characterization revealed mean grain area reduction from 26 µm2 for unburnished to 11 µm2 and 3 µm2 for burnished and heat-treated samples respectively. Most importantly this work reveals the enhanced possibility of burnishing stainless steels after heat-treatment with varying tangential misalignment angles.",

keywords = "Ultrasonic burnishing, heat treatment, Surface finish, Tangential misalignment",

author = "Rizwan Ullah and Agbemon Fangnon and Juha Huuki",

year = "2022",

month = oct,

day = "13",

doi = "10.1007/978-3-031-18326-3_4",

language = "English",

isbn = "978-3-031-18325-6",

volume = "1",

series = "Lecture notes in mechanical engineering",

publisher = "Springer",

pages = "38--47",

editor = "Kyoung-Yun Kim and Leslie Monplaisir and Jeremy Rickli",

booktitle = "Flexible Automation and Intelligent Manufacturing",

address = "Germany",

note = "International Conference on Flexible Automation and Intelligent Manufacturing, FAIM ; Conference date: 19-06-2022 Through 23-06-2022",

}

Ullah, R , Fangnon, A & Huuki, J 2022, Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment. julkaisussa K-Y Kim, L Monplaisir & J Rickli (toim), Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Vuosikerta 1, Lecture notes in mechanical engineering, Springer, Sivut 38-47, International Conference on Flexible Automation and Intelligent Manufacturing, Detroit, Michigan, Yhdysvallat, 19/06/2022. https://doi.org/10.1007/978-3-031-18326-3_4

Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment. / Ullah, Rizwan ; Fangnon, Agbemon ; Huuki, Juha.
Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. toim. / Kyoung-Yun Kim; Leslie Monplaisir; Jeremy Rickli. Vuosikerta 1 Springer, 2022. s. 38-47 (Lecture notes in mechanical engineering).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference contribution › Scientific › vertaisarvioitu

TY - GEN

T1 - Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment

AU - Ullah, Rizwan

AU - Fangnon, Agbemon

AU - Huuki, Juha

N1 - Conference code: 31

PY - 2022/10/13

Y1 - 2022/10/13

N2 - Ultrasonic burnishing induces beneficial compressive stresses and high surface quality in components with contact as a functional requirement. It was observed in previous work that some burnishing parameters can hinder burnishability of stainless steels. In this research tangential misalignment angles (TMA) for burnishing were varied considering as-supplied and heat-treated stainless steel. Properties such as surface hardness and surface roughness were measured after burnishing process. Electron Backscatter Diffraction was performed to characterize microstructure using Matlab (MTEX) to calculate average grain areas. By changing burnishing parameters, i.e., shaft rotational speed and burnishing tool diameter, it was observed that burnishing was less successful. Nevertheless, significant improvement in burnished surface quality was observed after heat-treatment process. In addition, grain size characterization revealed mean grain area reduction from 26 µm2 for unburnished to 11 µm2 and 3 µm2 for burnished and heat-treated samples respectively. Most importantly this work reveals the enhanced possibility of burnishing stainless steels after heat-treatment with varying tangential misalignment angles.

AB - Ultrasonic burnishing induces beneficial compressive stresses and high surface quality in components with contact as a functional requirement. It was observed in previous work that some burnishing parameters can hinder burnishability of stainless steels. In this research tangential misalignment angles (TMA) for burnishing were varied considering as-supplied and heat-treated stainless steel. Properties such as surface hardness and surface roughness were measured after burnishing process. Electron Backscatter Diffraction was performed to characterize microstructure using Matlab (MTEX) to calculate average grain areas. By changing burnishing parameters, i.e., shaft rotational speed and burnishing tool diameter, it was observed that burnishing was less successful. Nevertheless, significant improvement in burnished surface quality was observed after heat-treatment process. In addition, grain size characterization revealed mean grain area reduction from 26 µm2 for unburnished to 11 µm2 and 3 µm2 for burnished and heat-treated samples respectively. Most importantly this work reveals the enhanced possibility of burnishing stainless steels after heat-treatment with varying tangential misalignment angles.

KW - Ultrasonic burnishing

KW - heat treatment

KW - Surface finish

KW - Tangential misalignment

UR - http://www.scopus.com/inward/record.url?scp=85141879083&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-18326-3_4

DO - 10.1007/978-3-031-18326-3_4

M3 - Conference contribution

SN - 978-3-031-18325-6

VL - 1

T3 - Lecture notes in mechanical engineering

SP - 38

EP - 47

BT - Flexible Automation and Intelligent Manufacturing

A2 - Kim, Kyoung-Yun

A2 - Monplaisir, Leslie

A2 - Rickli, Jeremy

PB - Springer

T2 - International Conference on Flexible Automation and Intelligent Manufacturing

Y2 - 19 June 2022 through 23 June 2022

ER -

Ullah R , Fangnon A , Huuki J. Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment. julkaisussa Kim K-Y, Monplaisir L, Rickli J, toimittajat, Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus - Proceedings of FAIM 2022. Vuosikerta 1. Springer. 2022. s. 38-47. (Lecture notes in mechanical engineering). doi: 10.1007/978-3-031-18326-3_4

Effect of Ultrasonic Burnishing parameters on Burnished-surface quality of Stainless Steel after Heat Treatment

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

OpenUrl-saatavuus

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä