Effect of the urban microenvironment on the indoor air temperature of the residential building stock in the Helsinki region

Due to climate change, there is an increased risk of apartment overheating. In Nordic countries, heatwaves have not been common in the past and hence apartments are not equipped with mechanical cooling systems, so wise urban design might be a solution. This study evaluated the influence of the urban microenvironment on residential building indoor air temperature via green view index (GVI), floor area ratio and distance from the sea. We analyzed a large dataset of over 2000 apartments in the Helsinki region during summers of 2018 and 2021, where severe heatwaves were presented, and combined it with the aforementioned parameters. In the method used, closely situated buildings were clustered into groups by the microenvironment parameters. The results showed consistent correlations between clustered groups and microenvironment parameters, where the best-performing group had an indoor air temperature of about 1 °C lower than the average during the summers and 0.7 °C lower during the severe heatwaves. Building groups with higher GVI demonstrated a greater ability to endure long heatwaves, where combined influence of other urban microenvironment factors was significantly reduced. A substantial influence of sea distance and floor area ratio was observed during short heatwaves in the middle and late summer. The indoor temperature difference of the groups was compared to the average outdoor temperature difference of group areas based on the Finnish Meteorological Institute HARMONIE-AROME weather model implemented with the SURFEX module. The results revealed a consistent correlation between predicted outdoor and indoor temperatures and their distribution of group-to-area differences.