Dust studies in DIII-D tokamak

D. L. Rudakov, W. P. West, M. Groth, J. H. Yu, J. A. Boedo, B. D. Bray, N. H. Brooks, M. E. Fenstermacher, E. M. Hollmann, A. W. Hyatt, S. I. Krasheninnikov, C. J. Lasnier, R. A. Moyer, A. Yu Pigarov, R. Smirnov, W. M. Solomon, C. P C Wong

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientificvertaisarvioitu

1 Sitaatiot (Scopus)

Abstrakti

Studies of submicron dust using Mie scattering from Nd:YAG lasers and video data of micron to sub-millimeter sized dust on DIII-D tokamak have provided the first data of dust sources and transport during tokamak discharges. During normal operation on DIII-D dust observation rates are low, a few events per discharge or less. The net carbon content of the dust corresponds to a carbon atom density a few orders of magnitude below the core impurity density. Statistical analysis of Mie data collected over months of operation reveal correlation of increased dust rate with increased heating power and impulsive wall loading due to edge localized modes (ELMs) and disruptions. Generation of significant amounts of dust by disruptions is confirmed by the camera data. However, dust production by disruptions alone is insufficient to account for estimated in-vessel dust inventory in DIII-D. After an extended entry vent, thousands of dust particles are observed by cameras in the first 2-3 plasma discharges. Individual particles moving at velocities up to ∼300 m/s, breakup of larger particles into pieces, and collisions of particles with walls are observed. After ∼70 discharges, dust levels are reduced to a few events per discharge. In order to calibrate diagnostics and benchmark modeling, milligram amounts of micron-sized carbon dust have been injected into DIII-D discharges, leading to the core carbon density increase by a factor of 2-3. Following injection, dust trajectories in the divertor are mostly in the toroidal direction, consistent with the ion drag force. Dust from the injection is observed in the outboard midplane by a fast framing camera. The observed trajectories and velocities of the dust particles are in qualitative agreement with modeling by the 3D DustT code.

AlkuperäiskieliEnglanti
OtsikkoAIP Conference Proceedings
Sivut55-58
Sivumäärä4
Vuosikerta1041
DOI - pysyväislinkit
TilaJulkaistu - 2008
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaInternational Conference on the Physics of Dusty Plasmas - Azores, Ponta Delgada, Portugali
Kesto: 18 toukokuuta 200823 toukokuuta 2008
Konferenssinumero: 5

Julkaisusarja

NimiAIP Conference Proceedings
ISSN (painettu)0094-243X
ISSN (elektroninen)1551-7616

Conference

ConferenceInternational Conference on the Physics of Dusty Plasmas
MaaPortugali
KaupunkiPonta Delgada
Ajanjakso18/05/200823/05/2008

Sormenjälki Sukella tutkimusaiheisiin 'Dust studies in DIII-D tokamak'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä