Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study

Udayanto Dwi Atmojo; Kashif Gulzar; Valeriy Vyatkin; Rongwei Ma; Alexander Hopsu; Henri Makkonen; Atte Korhonen; Long Tran Phu

doi:10.1109/ICPHYS.2018.8390791

Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study

Udayanto Dwi Atmojo, Kashif Gulzar, Valeriy Vyatkin, Rongwei Ma, Alexander Hopsu, Henri Makkonen, Atte Korhonen, Long Tran Phu

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

5 Sitaatiot (Scopus)

158 Lataukset (Pure)

Abstrakti

This article presents the development of a distributed manufacturing case study enhanced with features that enable flexibility during the production process and the capability to continue the production process in case of fault scenarios. The approach described in this paper presents solutions to achieve the production of customized products, handle changes in product order, and minimize downtime and avoid total shutdown of the manufacturing system due to the occurrence of failures during the production process.

Alkuperäiskieli	Englanti
Otsikko	Proceedings of the 1st IEEE Industrial Cyber-Physical Systems, ICPS 2018
Kustantaja	IEEE
Sivut	690-695
Sivumäärä	6
ISBN (elektroninen)	9781538665312
DOI - pysyväislinkit	https://doi.org/10.1109/ICPHYS.2018.8390791
Tila	Julkaistu - 15 kesäk. 2018
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Industrial Cyber-Physical Systems - St. Petersburg, Venäjä Kesto: 15 toukok. 2018 → 18 toukok. 2018 Konferenssinumero: 1

Conference

Conference	International Conference on Industrial Cyber-Physical Systems
Lyhennettä	ICPS
Maa/Alue	Venäjä
Kaupunki	St. Petersburg
Ajanjakso	15/05/2018 → 18/05/2018

Pääsy asiakirjaan

10.1109/ICPHYS.2018.8390791

ELEC_Atmojo_etal_Distributed-Control-Architecture_ICPS_2018Accepted author manuscript, 666 KB

Muut tiedostot ja linkit

Link to publication in Scopus

Siteeraa tätä

@inproceedings{e78721bef37746fcb53a0d727923396d,

title = "Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study",

abstract = "This article presents the development of a distributed manufacturing case study enhanced with features that enable flexibility during the production process and the capability to continue the production process in case of fault scenarios. The approach described in this paper presents solutions to achieve the production of customized products, handle changes in product order, and minimize downtime and avoid total shutdown of the manufacturing system due to the occurrence of failures during the production process.",

keywords = "Fault tolerance, Flexible manufacturing systems, IEC 61499, Reconfigurable manufacturing systems",

author = "Atmojo, {Udayanto Dwi} and Kashif Gulzar and Valeriy Vyatkin and Rongwei Ma and Alexander Hopsu and Henri Makkonen and Atte Korhonen and Phu, {Long Tran}",

year = "2018",

month = jun,

day = "15",

doi = "10.1109/ICPHYS.2018.8390791",

language = "English",

pages = "690--695",

booktitle = "Proceedings of the 1st IEEE Industrial Cyber-Physical Systems, ICPS 2018",

publisher = "IEEE",

address = "United States",

note = "International Conference on Industrial Cyber-Physical Systems, ICPS ; Conference date: 15-05-2018 Through 18-05-2018",

}

Atmojo, UD , Gulzar, K , Vyatkin, V, Ma, R, Hopsu, A, Makkonen, H, Korhonen, A & Phu, LT 2018, Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study. julkaisussa Proceedings of the 1st IEEE Industrial Cyber-Physical Systems, ICPS 2018. IEEE, Sivut 690-695, International Conference on Industrial Cyber-Physical Systems, St. Petersburg, Venäjä, 15/05/2018. https://doi.org/10.1109/ICPHYS.2018.8390791

Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study. / Atmojo, Udayanto Dwi ; Gulzar, Kashif ; Vyatkin, Valeriy et al.
Proceedings of the 1st IEEE Industrial Cyber-Physical Systems, ICPS 2018. IEEE, 2018. s. 690-695.

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Distributed control architecture for dynamic reconfiguration

T2 - International Conference on Industrial Cyber-Physical Systems

AU - Atmojo, Udayanto Dwi

AU - Gulzar, Kashif

AU - Vyatkin, Valeriy

AU - Ma, Rongwei

AU - Hopsu, Alexander

AU - Makkonen, Henri

AU - Korhonen, Atte

AU - Phu, Long Tran

N1 - Conference code: 1

PY - 2018/6/15

Y1 - 2018/6/15

N2 - This article presents the development of a distributed manufacturing case study enhanced with features that enable flexibility during the production process and the capability to continue the production process in case of fault scenarios. The approach described in this paper presents solutions to achieve the production of customized products, handle changes in product order, and minimize downtime and avoid total shutdown of the manufacturing system due to the occurrence of failures during the production process.

AB - This article presents the development of a distributed manufacturing case study enhanced with features that enable flexibility during the production process and the capability to continue the production process in case of fault scenarios. The approach described in this paper presents solutions to achieve the production of customized products, handle changes in product order, and minimize downtime and avoid total shutdown of the manufacturing system due to the occurrence of failures during the production process.

KW - Fault tolerance

KW - Flexible manufacturing systems

KW - IEC 61499

KW - Reconfigurable manufacturing systems

UR - http://www.scopus.com/inward/record.url?scp=85050128367&partnerID=8YFLogxK

U2 - 10.1109/ICPHYS.2018.8390791

DO - 10.1109/ICPHYS.2018.8390791

M3 - Conference article in proceedings

AN - SCOPUS:85050128367

SP - 690

EP - 695

BT - Proceedings of the 1st IEEE Industrial Cyber-Physical Systems, ICPS 2018

PB - IEEE

Y2 - 15 May 2018 through 18 May 2018

ER -

Distributed control architecture for dynamic reconfiguration: Flexible assembly line case study

Abstrakti

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä