Direct measurement of residual strains in CFRP-tungsten hybrids using embedded strain gauges

M. Kanerva*, Paulo Antunes, E. Sarlin, O. Orell, J. Jokinen, M. Wallin, T. Brander, J. Vuorinen

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArticleScientificvertaisarvioitu

5 Sitaatiot (Scopus)

Abstrakti

In this work, the implementation of fully embedded electrical resistance strain gauges was studied for a hybrid material system. The samples were laminated using carbon-fiber-reinforced plastic (CFRP) and tungsten. The raw materials and the adhesive used for bonding strain sensors were characterized to understand the overlapping sources of non-linearity and error. Test-specific correction functions for a thermal output were determined for the strain gauge measurement and comparative fiber Bragg grating (FBG) measurement. The strain accumulation in the fiber direction during the cool-down phase for different cure cycles was analyzed using a finite element simulation. According to the results, embedded electrical resistance strain gauges can be used to determine the thermal expansion of a hybrid laminate with acceptable accuracy when thermal output is compensated for using case-specific correction functions accounting for measurement setup, the stiffness of the gauge bonding adhesive, and embedding.

AlkuperäiskieliEnglanti
Sivut352-363
Sivumäärä12
JulkaisuMaterials and Design
Vuosikerta127
DOI - pysyväislinkit
TilaJulkaistu - 5 elokuuta 2017
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki Sukella tutkimusaiheisiin 'Direct measurement of residual strains in CFRP-tungsten hybrids using embedded strain gauges'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

  • Siteeraa tätä

    Kanerva, M., Antunes, P., Sarlin, E., Orell, O., Jokinen, J., Wallin, M., ... Vuorinen, J. (2017). Direct measurement of residual strains in CFRP-tungsten hybrids using embedded strain gauges. Materials and Design, 127, 352-363. https://doi.org/10.1016/j.matdes.2017.04.008