Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

Hossein Bani Asadi; Rubina Ajdary; Jon Trifol Guzman; Orlando J. Rojas; Jukka Seppälä

doi:10.1016/j.carbpol.2021.118114

Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

Hossein Bani Asadi, Rubina Ajdary, Jon Trifol Guzman, Orlando J. Rojas, Jukka Seppälä^*

^*Tämän työn vastaava kirjoittaja

TRIUMF

Tutkimustuotos: Lehtiartikkeli › Article › Scientific › vertaisarvioitu

65 Sitaatiot (Scopus)

298 Lataukset (Pure)

Abstrakti

Direct-ink-writing (DIW) of hydrogels has become an attractive research area due to its capability to fabricate intricate, complex, and highly customizable structures at ambient conditions for various applications, including biomedical purposes. In the current study, cellulose nanofibrils reinforced aloe vera bio-hydrogels were utilized to develop 3D geometries through the DIW technique. The hydrogels revealed excellent viscoelastic properties enabled extruding thin filaments through a nozzle with a diameter of 630 μm. Accordingly, the lattice structures were printed precisely with a suitable resolution. The 3D-printed structures demonstrated significant wet stability due to the high aspect ratio of the nano- and microfibrils cellulose, reinforced the hydrogels, and protected the shape from extensive shrinkage upon drying. Furthermore, all printed samples had a porosity higher than 80% and a high-water uptake capacity of up to 46 g/g. Altogether, these fully bio-based, porous, and wet stable 3D structures might have an opportunity in biomedical fields.

Alkuperäiskieli	Englanti
Artikkeli	118114
Sivumäärä	12
Julkaisu	Carbohydrate Polymers
Vuosikerta	266
Varhainen verkossa julkaisun päivämäärä	24 huhtik. 2021
DOI - pysyväislinkit	https://doi.org/10.1016/j.carbpol.2021.118114
Tila	Julkaistu - 15 elok. 2021
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Pääsy asiakirjaan

10.1016/j.carbpol.2021.118114Lisenssi: CC BY

CHEM_Bani_Asadi_et_al_Direct_Ink_Writing_2021_Carbohydrate_PolymersFinal published version, 3,68 MBLisenssi: CC BY

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

BIOECONOMY: BIOECONOMY Alliance for excellence in sustainable biomass refining
Linder, M.
01/01/2020 → 31/12/2023
Projekti: Academy of Finland: Other research funding
VALUEBIOMAT: Bio-öljyihin perustuvat polymeerikomposiitit; arvoketju synteesistä digitaaliseen valmistukseen
Seppälä, J., Äkräs, L., Revitzer, H., van Bochove, B., Bani Asadi, H., Farzan, A., Dienel, K., Teotia, A., Borandeh, S. & Madani, M.
01/06/2019 → 28/02/2023
Projekti: Academy of Finland: Strategic research funding

OtaNano
Anna Rissanen (Manager)
Aalto-yliopisto
Laitteistot/tilat: Facility
OtaNano Nanomikroskopiakeskus
Jani Seitsonen (Manager)
OtaNano
Laitteistot/tilat: Facility

Siteeraa tätä

@article{2afe361c78c84c2baf82d79daa883c06,

title = "Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels",

abstract = "Direct-ink-writing (DIW) of hydrogels has become an attractive research area due to its capability to fabricate intricate, complex, and highly customizable structures at ambient conditions for various applications, including biomedical purposes. In the current study, cellulose nanofibrils reinforced aloe vera bio-hydrogels were utilized to develop 3D geometries through the DIW technique. The hydrogels revealed excellent viscoelastic properties enabled extruding thin filaments through a nozzle with a diameter of 630 μm. Accordingly, the lattice structures were printed precisely with a suitable resolution. The 3D-printed structures demonstrated significant wet stability due to the high aspect ratio of the nano- and microfibrils cellulose, reinforced the hydrogels, and protected the shape from extensive shrinkage upon drying. Furthermore, all printed samples had a porosity higher than 80% and a high-water uptake capacity of up to 46 g/g. Altogether, these fully bio-based, porous, and wet stable 3D structures might have an opportunity in biomedical fields.",

keywords = "Aloe vera, Cellulose nanofibrils, Hydrogel, 3D printing",

author = "{Bani Asadi}, Hossein and Rubina Ajdary and {Trifol Guzman}, Jon and Rojas, {Orlando J.} and Jukka Sepp{\"a}l{\"a}",

note = "Funding Information: The authors would like to acknowledge funding support by the Academy of Finland's Biofuture 2025 program under project No. 2228357-4 (3D Manufacturing of Novel Biomaterials) and No. 327248 (ValueBiomat). This work made use of the facilities of Aalto University's Nanomicroscopy Center. The authors also would like to acknowledge the discussions with Dr. Janika Lehtonen and Dr. Arun Teotia. Funding Information: The authors would like to acknowledge funding support by the Academy of Finland's Biofuture 2025 program under project No. 2228357-4 (3D Manufacturing of Novel Biomaterials) and No. 327248 (ValueBiomat). This work made use of the facilities of Aalto University's Nanomicroscopy Center. The authors also would like to acknowledge the discussions with Dr. Janika Lehtonen and Dr. Arun Teotia. Publisher Copyright: {\textcopyright} 2021 The Author(s)",

year = "2021",

month = aug,

day = "15",

doi = "10.1016/j.carbpol.2021.118114",

language = "English",

volume = "266",

journal = "Carbohydrate Polymers",

issn = "0144-8617",

publisher = "Elsevier Science Ltd.",

}

TY - JOUR

T1 - Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

AU - Bani Asadi, Hossein

AU - Ajdary, Rubina

AU - Trifol Guzman, Jon

AU - Rojas, Orlando J.

AU - Seppälä, Jukka

N1 - Funding Information: The authors would like to acknowledge funding support by the Academy of Finland's Biofuture 2025 program under project No. 2228357-4 (3D Manufacturing of Novel Biomaterials) and No. 327248 (ValueBiomat). This work made use of the facilities of Aalto University's Nanomicroscopy Center. The authors also would like to acknowledge the discussions with Dr. Janika Lehtonen and Dr. Arun Teotia. Funding Information: The authors would like to acknowledge funding support by the Academy of Finland's Biofuture 2025 program under project No. 2228357-4 (3D Manufacturing of Novel Biomaterials) and No. 327248 (ValueBiomat). This work made use of the facilities of Aalto University's Nanomicroscopy Center. The authors also would like to acknowledge the discussions with Dr. Janika Lehtonen and Dr. Arun Teotia. Publisher Copyright: © 2021 The Author(s)

PY - 2021/8/15

Y1 - 2021/8/15

N2 - Direct-ink-writing (DIW) of hydrogels has become an attractive research area due to its capability to fabricate intricate, complex, and highly customizable structures at ambient conditions for various applications, including biomedical purposes. In the current study, cellulose nanofibrils reinforced aloe vera bio-hydrogels were utilized to develop 3D geometries through the DIW technique. The hydrogels revealed excellent viscoelastic properties enabled extruding thin filaments through a nozzle with a diameter of 630 μm. Accordingly, the lattice structures were printed precisely with a suitable resolution. The 3D-printed structures demonstrated significant wet stability due to the high aspect ratio of the nano- and microfibrils cellulose, reinforced the hydrogels, and protected the shape from extensive shrinkage upon drying. Furthermore, all printed samples had a porosity higher than 80% and a high-water uptake capacity of up to 46 g/g. Altogether, these fully bio-based, porous, and wet stable 3D structures might have an opportunity in biomedical fields.

AB - Direct-ink-writing (DIW) of hydrogels has become an attractive research area due to its capability to fabricate intricate, complex, and highly customizable structures at ambient conditions for various applications, including biomedical purposes. In the current study, cellulose nanofibrils reinforced aloe vera bio-hydrogels were utilized to develop 3D geometries through the DIW technique. The hydrogels revealed excellent viscoelastic properties enabled extruding thin filaments through a nozzle with a diameter of 630 μm. Accordingly, the lattice structures were printed precisely with a suitable resolution. The 3D-printed structures demonstrated significant wet stability due to the high aspect ratio of the nano- and microfibrils cellulose, reinforced the hydrogels, and protected the shape from extensive shrinkage upon drying. Furthermore, all printed samples had a porosity higher than 80% and a high-water uptake capacity of up to 46 g/g. Altogether, these fully bio-based, porous, and wet stable 3D structures might have an opportunity in biomedical fields.

KW - Aloe vera

KW - Cellulose nanofibrils

KW - Hydrogel

KW - 3D printing

UR - http://www.scopus.com/inward/record.url?scp=85105694417&partnerID=8YFLogxK

U2 - 10.1016/j.carbpol.2021.118114

DO - 10.1016/j.carbpol.2021.118114

M3 - Article

C2 - 34044931

AN - SCOPUS:85105694417

SN - 0144-8617

VL - 266

JO - Carbohydrate Polymers

JF - Carbohydrate Polymers

M1 - 118114

ER -

Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

Abstrakti

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

BIOECONOMY: BIOECONOMY Alliance for excellence in sustainable biomass refining

VALUEBIOMAT: Bio-öljyihin perustuvat polymeerikomposiitit; arvoketju synteesistä digitaaliseen valmistukseen

Laitteet

OtaNano

OtaNano Nanomikroskopiakeskus

Siteeraa tätä