Diamond-like carbon coatings by arc-discharge methods

J. Koskinen; A. Anttila; J. P. Hirvonen

doi:10.1016/0257-8972(91)90280-A

Diamond-like carbon coatings by arc-discharge methods

J. Koskinen^*, A. Anttila, J. P. Hirvonen

^*Tämän työn vastaava kirjoittaja

Ei julkaistu Aalto-yliopiston affiliaatiolla

Tutkimustuotos: Lehtiartikkeli › Article › Scientific › vertaisarvioitu

51 Sitaatiot (Scopus)

Abstrakti

Pulsed arc-discharge deposition has been used to prepare diamond-like carbon (DLC) films on various substrates. Both direct and curved plasma methods have been used. Coatings with excellent tribological properties and good adhesion have been demonstrated. The coefficient of friction of diamond-like films against a Si₃N₄ ball was between 0.045 and 0.084 which is an order of magnitude smaller than for most other materials. The corresponding wear coefficient was between 0.5 × 10^-16 and 1.7 × 10^-16m³N m^-1. The diamond-like films produced using mass-separated ion beams seem to be similar in structure and properties except that the arc-discharge deposited films suffer from graphite particles on the depositions, even when using a curved solenoid.

Alkuperäiskieli	Englanti
Sivut	180-187
Sivumäärä	8
Julkaisu	Surface and Coatings Technology
Vuosikerta	47
Numero	1-3
DOI - pysyväislinkit	https://doi.org/10.1016/0257-8972(91)90280-A
Tila	Julkaistu - elok. 1991
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Pääsy asiakirjaan

10.1016/0257-8972(91)90280-A

Muut tiedostot ja linkit

Link to publication in Scopus

Siteeraa tätä

@article{6d0e7c697be24bbfbe6b358a7ddfaeb2,

title = "Diamond-like carbon coatings by arc-discharge methods",

abstract = "Pulsed arc-discharge deposition has been used to prepare diamond-like carbon (DLC) films on various substrates. Both direct and curved plasma methods have been used. Coatings with excellent tribological properties and good adhesion have been demonstrated. The coefficient of friction of diamond-like films against a Si3N4 ball was between 0.045 and 0.084 which is an order of magnitude smaller than for most other materials. The corresponding wear coefficient was between 0.5 × 10-16 and 1.7 × 10-16m3N m-1. The diamond-like films produced using mass-separated ion beams seem to be similar in structure and properties except that the arc-discharge deposited films suffer from graphite particles on the depositions, even when using a curved solenoid.",

author = "J. Koskinen and A. Anttila and Hirvonen, {J. P.}",

year = "1991",

month = aug,

doi = "10.1016/0257-8972(91)90280-A",

language = "English",

volume = "47",

pages = "180--187",

journal = "Surface and Coatings Technology",

issn = "0257-8972",

publisher = "Elsevier",

number = "1-3",

}

TY - JOUR

T1 - Diamond-like carbon coatings by arc-discharge methods

AU - Koskinen, J.

AU - Anttila, A.

AU - Hirvonen, J. P.

PY - 1991/8

Y1 - 1991/8

N2 - Pulsed arc-discharge deposition has been used to prepare diamond-like carbon (DLC) films on various substrates. Both direct and curved plasma methods have been used. Coatings with excellent tribological properties and good adhesion have been demonstrated. The coefficient of friction of diamond-like films against a Si3N4 ball was between 0.045 and 0.084 which is an order of magnitude smaller than for most other materials. The corresponding wear coefficient was between 0.5 × 10-16 and 1.7 × 10-16m3N m-1. The diamond-like films produced using mass-separated ion beams seem to be similar in structure and properties except that the arc-discharge deposited films suffer from graphite particles on the depositions, even when using a curved solenoid.

AB - Pulsed arc-discharge deposition has been used to prepare diamond-like carbon (DLC) films on various substrates. Both direct and curved plasma methods have been used. Coatings with excellent tribological properties and good adhesion have been demonstrated. The coefficient of friction of diamond-like films against a Si3N4 ball was between 0.045 and 0.084 which is an order of magnitude smaller than for most other materials. The corresponding wear coefficient was between 0.5 × 10-16 and 1.7 × 10-16m3N m-1. The diamond-like films produced using mass-separated ion beams seem to be similar in structure and properties except that the arc-discharge deposited films suffer from graphite particles on the depositions, even when using a curved solenoid.

UR - http://www.scopus.com/inward/record.url?scp=0026207097&partnerID=8YFLogxK

U2 - 10.1016/0257-8972(91)90280-A

DO - 10.1016/0257-8972(91)90280-A

M3 - Article

AN - SCOPUS:0026207097

SN - 0257-8972

VL - 47

SP - 180

EP - 187

JO - Surface and Coatings Technology

JF - Surface and Coatings Technology

IS - 1-3

ER -

Diamond-like carbon coatings by arc-discharge methods

Abstrakti

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä