Development of a 650 kN tension and compression force transducer

Lauri Novio; Jonathan Lundström; Timon Schapals; Thomas White; Panu Kiviluoma; Petri Kuosmanen

Development of a 650 kN tension and compression force transducer

Lauri Novio, Jonathan Lundström, Timon Schapals, Thomas White, Panu Kiviluoma, Petri Kuosmanen

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

Abstrakti

Accurate force proving instruments are key to reliable results in research. In this study, a 650 kN tension and compression force transducer was developed, based on strain measurement, for a hydraulic research test bench. An optimal design was derived through FE-analyses and the calibration of the force transducer was planned according to the standard ISO 376:2011. The development process was validated by designing and calibrating a prototype. Observations for the development process were gained in the validation process and are discussed together with results from FE-analysis.

Alkuperäiskieli	Englanti
Otsikko	Proceedings of the 8th Baltic Mechatronics Symposium
Kustantaja	Aalto-yliopisto
Sivumäärä	6
ISBN (elektroninen)	978-952-64-9635-1
Tila	Julkaistu - 2023
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	Baltic Mechatronics Symposium - Tallinn, Viro Kesto: 3 toukok. 2023 → 3 toukok. 2023 Konferenssinumero: 8

Conference

Conference	Baltic Mechatronics Symposium
Maa/Alue	Viro
Kaupunki	Tallinn
Ajanjakso	03/05/2023 → 03/05/2023

Muut tiedostot ja linkit

https://urn.fi/URN:NBN:fi:aalto-202306304328

Siteeraa tätä

@inproceedings{8e5965990e244615b864cc6c65ad10fe,

title = "Development of a 650 kN tension and compression force transducer",

abstract = "Accurate force proving instruments are key to reliable results in research. In this study, a 650 kN tension and compression force transducer was developed, based on strain measurement, for a hydraulic research test bench. An optimal design was derived through FE-analyses and the calibration of the force transducer was planned according to the standard ISO 376:2011. The development process was validated by designing and calibrating a prototype. Observations for the development process were gained in the validation process and are discussed together with results from FE-analysis.",

keywords = "strain gauge, radial symmetric shear beam, ISO 376:2011",

author = "Lauri Novio and Jonathan Lundstr{\"o}m and Timon Schapals and Thomas White and Panu Kiviluoma and Petri Kuosmanen",

year = "2023",

language = "English",

booktitle = "Proceedings of the 8th Baltic Mechatronics Symposium",

publisher = "Aalto-yliopisto",

address = "Finland",

note = "Baltic Mechatronics Symposium ; Conference date: 03-05-2023 Through 03-05-2023",

}

TY - GEN

T1 - Development of a 650 kN tension and compression force transducer

AU - Novio, Lauri

AU - Lundström, Jonathan

AU - Schapals, Timon

AU - White, Thomas

AU - Kiviluoma, Panu

AU - Kuosmanen, Petri

N1 - Conference code: 8

PY - 2023

Y1 - 2023

N2 - Accurate force proving instruments are key to reliable results in research. In this study, a 650 kN tension and compression force transducer was developed, based on strain measurement, for a hydraulic research test bench. An optimal design was derived through FE-analyses and the calibration of the force transducer was planned according to the standard ISO 376:2011. The development process was validated by designing and calibrating a prototype. Observations for the development process were gained in the validation process and are discussed together with results from FE-analysis.

AB - Accurate force proving instruments are key to reliable results in research. In this study, a 650 kN tension and compression force transducer was developed, based on strain measurement, for a hydraulic research test bench. An optimal design was derived through FE-analyses and the calibration of the force transducer was planned according to the standard ISO 376:2011. The development process was validated by designing and calibrating a prototype. Observations for the development process were gained in the validation process and are discussed together with results from FE-analysis.

KW - strain gauge

KW - radial symmetric shear beam

KW - ISO 376:2011

UR - https://urn.fi/URN:NBN:fi:aalto-202306304328

M3 - Conference article in proceedings

BT - Proceedings of the 8th Baltic Mechatronics Symposium

PB - Aalto-yliopisto

T2 - Baltic Mechatronics Symposium

Y2 - 3 May 2023 through 3 May 2023

ER -

Development of a 650 kN tension and compression force transducer

Abstrakti

Conference

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä