Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads

A. Pitilakis; O. Tsilipakos; M. Seckel; M. Christodoulou; A. C. Tasolamprou; F. Liu; D. Manessis; N. V. Kantartzis; C. Liaskos; C. M. Soukoulis; S. A. Tretyakov; M. Kafesaki

doi:10.1109/Metamaterials52332.2021.9577147

Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads

A. Pitilakis, O. Tsilipakos, M. Seckel, M. Christodoulou, A. C. Tasolamprou, F. Liu, D. Manessis, N. V. Kantartzis, C. Liaskos, C. M. Soukoulis, S. A. Tretyakov, M. Kafesaki

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

Abstrakti

We present the design, fabrication, and characterization of a proof-of-concept reconfigurable multifunctional metasurface. Our implementation relies on a printed circuit board loaded with commercial-off-the-shelf resistors and capacitors (surface mount devices) to shape the metasurface response in the microwave regime spanning 4-12 GHz. In a broader vision, these static loads are to be replaced by computer-controlled chips, thus realizing a software-defined metamaterial vision. In the current implementation, the same type of board is loaded with different combinations of resistive and reactive loads, to model different configurations and realize the corresponding functionalities, such as absorption, steering, and polarizing. Our anechoic chamber measurements indicate good agreement between simulation and experiment.

Alkuperäiskieli	Englanti
Otsikko	2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021
Kustantaja	IEEE
Sivut	337-339
Sivumäärä	3
ISBN (elektroninen)	978-1-7281-5018-5
DOI - pysyväislinkit	https://doi.org/10.1109/Metamaterials52332.2021.9577147
Tila	Julkaistu - 20 syysk. 2021
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Congress on Artificial Materials for Novel Wave Phenomena - Virtual, Online, New York, Yhdysvallat Kesto: 20 syysk. 2021 → 25 syysk. 2021 Konferenssinumero: 15

Conference

Conference	International Congress on Artificial Materials for Novel Wave Phenomena
Lyhennettä	Metamaterials
Maa/Alue	Yhdysvallat
Kaupunki	New York
Ajanjakso	20/09/2021 → 25/09/2021

Pääsy asiakirjaan

10.1109/Metamaterials52332.2021.9577147

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

VISORSURF: A Hardware Platform for Software-driven Functional Metasurfaces
Tretiakov, S., Asadchy, V., Liu, F., Cuesta Soto, F., Ptitcyn, G., Wang, X., Mirmoosa, M., Jayathurathnage, P. & Tzarouchis, D.
01/01/2017 → 31/12/2020
Projekti: EU: Framework programmes funding

Siteeraa tätä

Pitilakis, A., Tsilipakos, O., Seckel, M., Christodoulou, M., Tasolamprou, A. C., Liu, F., Manessis, D., Kantartzis, N. V., Liaskos, C., Soukoulis, C. M., Tretyakov, S. A., & Kafesaki, M. (2021). Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads. teoksessa 2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021 (Sivut 337-339). IEEE. https://doi.org/10.1109/Metamaterials52332.2021.9577147

@inproceedings{87b95242bfb54b87a9350bf07f645ae1,

title = "Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads",

abstract = "We present the design, fabrication, and characterization of a proof-of-concept reconfigurable multifunctional metasurface. Our implementation relies on a printed circuit board loaded with commercial-off-the-shelf resistors and capacitors (surface mount devices) to shape the metasurface response in the microwave regime spanning 4-12 GHz. In a broader vision, these static loads are to be replaced by computer-controlled chips, thus realizing a software-defined metamaterial vision. In the current implementation, the same type of board is loaded with different combinations of resistive and reactive loads, to model different configurations and realize the corresponding functionalities, such as absorption, steering, and polarizing. Our anechoic chamber measurements indicate good agreement between simulation and experiment.",

author = "A. Pitilakis and O. Tsilipakos and M. Seckel and M. Christodoulou and Tasolamprou, {A. C.} and F. Liu and D. Manessis and Kantartzis, {N. V.} and C. Liaskos and Soukoulis, {C. M.} and Tretyakov, {S. A.} and M. Kafesaki",

note = "| openaire: EC/H2020/736876/EU//VISORSURF ; International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials ; Conference date: 20-09-2021 Through 25-09-2021",

year = "2021",

month = sep,

day = "20",

doi = "10.1109/Metamaterials52332.2021.9577147",

language = "English",

pages = "337--339",

booktitle = "2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021",

publisher = "IEEE",

address = "United States",

}

Pitilakis, A, Tsilipakos, O, Seckel, M, Christodoulou, M, Tasolamprou, AC, Liu, F, Manessis, D, Kantartzis, NV, Liaskos, C, Soukoulis, CM, Tretyakov, SA & Kafesaki, M 2021, Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads. julkaisussa 2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021. IEEE, Sivut 337-339, International Congress on Artificial Materials for Novel Wave Phenomena, New York, New York, Yhdysvallat, 20/09/2021. https://doi.org/10.1109/Metamaterials52332.2021.9577147

Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads. / Pitilakis, A.; Tsilipakos, O.; Seckel, M. et al.
2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021. IEEE, 2021. s. 337-339.

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads

AU - Pitilakis, A.

AU - Tsilipakos, O.

AU - Seckel, M.

AU - Christodoulou, M.

AU - Tasolamprou, A. C.

AU - Liu, F.

AU - Manessis, D.

AU - Kantartzis, N. V.

AU - Liaskos, C.

AU - Soukoulis, C. M.

AU - Tretyakov, S. A.

AU - Kafesaki, M.

N1 - Conference code: 15

PY - 2021/9/20

Y1 - 2021/9/20

N2 - We present the design, fabrication, and characterization of a proof-of-concept reconfigurable multifunctional metasurface. Our implementation relies on a printed circuit board loaded with commercial-off-the-shelf resistors and capacitors (surface mount devices) to shape the metasurface response in the microwave regime spanning 4-12 GHz. In a broader vision, these static loads are to be replaced by computer-controlled chips, thus realizing a software-defined metamaterial vision. In the current implementation, the same type of board is loaded with different combinations of resistive and reactive loads, to model different configurations and realize the corresponding functionalities, such as absorption, steering, and polarizing. Our anechoic chamber measurements indicate good agreement between simulation and experiment.

AB - We present the design, fabrication, and characterization of a proof-of-concept reconfigurable multifunctional metasurface. Our implementation relies on a printed circuit board loaded with commercial-off-the-shelf resistors and capacitors (surface mount devices) to shape the metasurface response in the microwave regime spanning 4-12 GHz. In a broader vision, these static loads are to be replaced by computer-controlled chips, thus realizing a software-defined metamaterial vision. In the current implementation, the same type of board is loaded with different combinations of resistive and reactive loads, to model different configurations and realize the corresponding functionalities, such as absorption, steering, and polarizing. Our anechoic chamber measurements indicate good agreement between simulation and experiment.

UR - http://www.scopus.com/inward/record.url?scp=85118953807&partnerID=8YFLogxK

U2 - 10.1109/Metamaterials52332.2021.9577147

DO - 10.1109/Metamaterials52332.2021.9577147

M3 - Conference article in proceedings

AN - SCOPUS:85118953807

SP - 337

EP - 339

BT - 2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021

PB - IEEE

T2 - International Congress on Artificial Materials for Novel Wave Phenomena

Y2 - 20 September 2021 through 25 September 2021

ER -

Pitilakis A, Tsilipakos O, Seckel M, Christodoulou M, Tasolamprou AC, Liu F et al. Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads. julkaisussa 2021 15th International Congress on Artificial Materials for Novel Wave Phenomena, Metamaterials 2021. IEEE. 2021. s. 337-339 doi: 10.1109/Metamaterials52332.2021.9577147

Design, Fabrication, and Characterization of a Proof-of-Concept Multi-functional Microwave Metasurface using Static Loads

Abstrakti

Conference

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

VISORSURF: A Hardware Platform for Software-driven Functional Metasurfaces

Siteeraa tätä