Demonstration of improvement in 2D tomographic reconstructions of filtered cameras in the JET ITER-like wall divertor due to corrected interpretation of reflections

Tutkimustuotos: Lehtiartikkeli

Tutkijat

Organisaatiot

  • Culham Sci Ctr, Culham Science Centre, CCFE
  • Oak Ridge Natl Lab, Oak Ridge National Laboratory, United States Department of Energy (DOE)
  • Univ Lisbon, Universidade de Lisboa, Inst Super Tecn, Inst Plasmas & Fusao Nucl
  • Forschungszentrum Julich GmbH, Helmholtz Association, Research Center Julich, Inst Energie & Klimaforsch Plasmaphys

Kuvaus

Improved localization of emission and reduction of artefacts have been achieved in tomographic reconstructions of the tangentially viewing spectroscopic divertor cameras in JET by introducing the contribution of reflections from the metallic wall surfaces in the geometry definition of the tomography process. The reconstructions thus describe the plasma emission only without features arising from misinterpreted reflected light. Benchmarks with synthetic emission distributions showed accurate reproduction within 10% and 1-2% of the reference emission distributions and camera images, respectively, when the reflection correction was applied. Without the correction, the reconstructed emission was observed to concentrate from the divertor volume towards the wall surfaces together with bright emission artefacts appearing in front of the surfaces to reproduce the reflections seen in the camera images.

Yksityiskohdat

AlkuperäiskieliEnglanti
Artikkeli10013
Sivumäärä8
JulkaisuJournal of Instrumentation
Vuosikerta14
TilaJulkaistu - lokakuuta 2019
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu
TapahtumaEuropean Conference on Plasma Diagnostics - Lisbon, Portugali
Kesto: 6 toukokuuta 201910 toukokuuta 2019
Konferenssinumero: 3

ID: 40177913