Data correlation model for hydraulic fluid filter condition monitoring

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussavertaisarvioitu



  • Parker Hannifin, Hydraulic and Industrial Process Filtration EMEA, Urjala, Finland


In fluid power systems, one of the most common causes of failure is contamination of the hydraulic fluid. Without filtering the fluid gets contaminated with harmful particles over time, which will cause excessive wear of components or even block motion of parts in flow control valves. In order to avoid machine downtime, it is important to monitor that adequate technical performance level of the fluid is maintained at all times.
This study contributes to condition-based maintenance of hydraulic fluid filter units by establishing a correlation equation, based on comprehensive laboratory tests and incorporated in a simulation model, relating the pressure drop over the filter unit with the main variables describing the operating conditions of the fluid system as well as with filter operating time.
The paper describes how the correlation equation and the simulation model was constructed. The results indicate that good correlation was obtained (R-square value 0.98) with the constructed equation between the physical variables and the temporal development of the pressure drop over the filter. The model can be used as a building block for a smart filter unit that can predict its lifetime.


Otsikko16th Scandinavian International Conference on Fluid Power, SICFP 2019
ToimittajatKalevi Huhtala
TilaJulkaistu - 22 toukokuuta 2019
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaScandinavian International Conference on Fluid Power - Tampere-talo, Tampere, Suomi
Kesto: 22 toukokuuta 201924 toukokuuta 2019
Konferenssinumero: 16


ConferenceScandinavian International Conference on Fluid Power

ID: 40269632