Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials

Grzegorz Stando; Pyry-Mikko Hannula; Bogumiła Kumanek; Mari Lundström; Dawid Janas

doi:10.1016/j.wri.2021.100156

Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials

Grzegorz Stando
, Pyry-Mikko Hannula
, Bogumiła Kumanek
, Mari Lundström
, Dawid Janas^*

^*Tämän työn vastaava kirjoittaja

Silesian University of Technology

Tutkimustuotos: Lehtiartikkeli › Article › Scientific › vertaisarvioitu

32 Sitaatiot (Scopus)

151 Lataukset (Pure)

Abstrakti

In this study, copper present in industrial waste water with a variety of other impurities (Fe, Mg, Al, Zn, As) was subjected for selective electrochemical recovery. The recovery was conducted directly on carbon nanostructures in order to create added-value products synergistically. In-depth electrochemical and structural analysis showed that single/multi-walled carbon nanotubes (CNTs) and graphene composites could provide an excellent substrate for Cu's electrochemical recovery. Furthermore, formulations based on them also enabled the formation of even Cu deposits on the surface directly from wastewater solutions without further bath condition adjustments. After just 1-h electrodeposition at −0.1V vs. SCE, a nanocomposite based on CNTs was obtained. Cu was recovered exclusively and accounted for 45% of the total weight of the composite.

Alkuperäiskieli	Englanti
Artikkeli	100156
Sivumäärä	13
Julkaisu	Water Resources and Industry
Vuosikerta	26
Varhainen verkossa julkaisun päivämäärä	24 heinäk. 2021
DOI - pysyväislinkit	https://doi.org/10.1016/j.wri.2021.100156
Tila	Julkaistu - jouluk. 2021
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Rahoitus

G.S, B.K, and D.J. would like to thank the National Center for Research and Development, Poland (under the Leader program, grant agreement LIDER/0001/L-8/16/NCBR/2017). G.S. and D.J. also acknowledge the National Agency for Academic Exchange of Poland (under the Academic International Partnerships program, grant agreement PPI/APM/2018/1/00004) for supporting training in the Aalto University , which enabled the execution of the study. G.S. acknowledges the Ministry of Science and Higher Education of Poland for financial support of scientific work from budget funds for science in the years 2019–2023 as a research project under the “Diamond Grant” program (grant agreement 0036/DIA/201948). P-M.H. and M.L. acknowledge the support of the “NoWASTE” project (Grant 297962) funded by Academy of Finland .

YK:n kestävän kehityksen tavoitteet

Tämä tuotos edistää seuraavia kestävän kehityksen tavoitteita:

SDG 6 – Puhdas vesi ja puhtaanapito
SDG 12 – Vastuullinen kulutus ja tuotanto

Pääsy asiakirjaan

10.1016/j.wri.2021.100156Lisenssi: CC BY-NC-ND

CHEM_Stando_et_al_Copper_recovery_2021_Water_Resources_and_IndustryFinal published version, 11,2 MBLisenssi: CC BY-NC-ND

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

NoWASTE: Uudenlainen arvometallien talteenotto sivuvirroista
Lundström, M. (Vastuullinen johtaja), Hannula, P.-M. (Projektin jäsen), Yliniemi, K. (Projektin jäsen), Revitzer, H. (Projektin jäsen), Junnila, T. (Projektin jäsen), Kinnunen, S. (Projektin jäsen), Barranco Asensio, V. (Projektin jäsen), Karppinen, A. (Projektin jäsen), Wang, Z. (Projektin jäsen), Wilson, B. (Projektin jäsen) & Halli, P. (Projektin jäsen)
01/09/2016 → 31/12/2020
Projekti: Academy of Finland: Other research funding

Siteeraa tätä

@article{50edfa066e7348bd865b699fb8e450d9,

title = "Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials",

abstract = "In this study, copper present in industrial waste water with a variety of other impurities (Fe, Mg, Al, Zn, As) was subjected for selective electrochemical recovery. The recovery was conducted directly on carbon nanostructures in order to create added-value products synergistically. In-depth electrochemical and structural analysis showed that single/multi-walled carbon nanotubes (CNTs) and graphene composites could provide an excellent substrate for Cu's electrochemical recovery. Furthermore, formulations based on them also enabled the formation of even Cu deposits on the surface directly from wastewater solutions without further bath condition adjustments. After just 1-h electrodeposition at −0.1V vs. SCE, a nanocomposite based on CNTs was obtained. Cu was recovered exclusively and accounted for 45\% of the total weight of the composite.",

keywords = "Circular economy, Copper recovery, Electrodeposition, Waste management",

author = "Grzegorz Stando and Pyry-Mikko Hannula and Bogumi{\l}a Kumanek and Mari Lundstr{\"o}m and Dawid Janas",

note = "Funding Information: G.S, B.K, and D.J. would like to thank the National Center for Research and Development, Poland (under the Leader program, grant agreement LIDER/0001/L-8/16/NCBR/2017). G.S. and D.J. also acknowledge the National Agency for Academic Exchange of Poland (under the Academic International Partnerships program, grant agreement PPI/APM/2018/1/00004) for supporting training in the Aalto University , which enabled the execution of the study. G.S. acknowledges the Ministry of Science and Higher Education of Poland for financial support of scientific work from budget funds for science in the years 2019–2023 as a research project under the “Diamond Grant” program (grant agreement 0036/DIA/201948). P-M.H. and M.L. acknowledge the support of the “NoWASTE” project (Grant 297962) funded by Academy of Finland . Publisher Copyright: {\textcopyright} 2021 The Author(s)",

year = "2021",

month = dec,

doi = "10.1016/j.wri.2021.100156",

language = "English",

volume = "26",

journal = "Water Resources and Industry",

issn = "2212-3717",

publisher = "Elsevier",

}

TY - JOUR

T1 - Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials

AU - Stando, Grzegorz

AU - Hannula, Pyry-Mikko

AU - Kumanek, Bogumiła

AU - Lundström, Mari

AU - Janas, Dawid

N1 - Funding Information: G.S, B.K, and D.J. would like to thank the National Center for Research and Development, Poland (under the Leader program, grant agreement LIDER/0001/L-8/16/NCBR/2017). G.S. and D.J. also acknowledge the National Agency for Academic Exchange of Poland (under the Academic International Partnerships program, grant agreement PPI/APM/2018/1/00004) for supporting training in the Aalto University , which enabled the execution of the study. G.S. acknowledges the Ministry of Science and Higher Education of Poland for financial support of scientific work from budget funds for science in the years 2019–2023 as a research project under the “Diamond Grant” program (grant agreement 0036/DIA/201948). P-M.H. and M.L. acknowledge the support of the “NoWASTE” project (Grant 297962) funded by Academy of Finland . Publisher Copyright: © 2021 The Author(s)

PY - 2021/12

Y1 - 2021/12

N2 - In this study, copper present in industrial waste water with a variety of other impurities (Fe, Mg, Al, Zn, As) was subjected for selective electrochemical recovery. The recovery was conducted directly on carbon nanostructures in order to create added-value products synergistically. In-depth electrochemical and structural analysis showed that single/multi-walled carbon nanotubes (CNTs) and graphene composites could provide an excellent substrate for Cu's electrochemical recovery. Furthermore, formulations based on them also enabled the formation of even Cu deposits on the surface directly from wastewater solutions without further bath condition adjustments. After just 1-h electrodeposition at −0.1V vs. SCE, a nanocomposite based on CNTs was obtained. Cu was recovered exclusively and accounted for 45% of the total weight of the composite.

AB - In this study, copper present in industrial waste water with a variety of other impurities (Fe, Mg, Al, Zn, As) was subjected for selective electrochemical recovery. The recovery was conducted directly on carbon nanostructures in order to create added-value products synergistically. In-depth electrochemical and structural analysis showed that single/multi-walled carbon nanotubes (CNTs) and graphene composites could provide an excellent substrate for Cu's electrochemical recovery. Furthermore, formulations based on them also enabled the formation of even Cu deposits on the surface directly from wastewater solutions without further bath condition adjustments. After just 1-h electrodeposition at −0.1V vs. SCE, a nanocomposite based on CNTs was obtained. Cu was recovered exclusively and accounted for 45% of the total weight of the composite.

KW - Circular economy

KW - Copper recovery

KW - Electrodeposition

KW - Waste management

UR - https://www.scopus.com/pages/publications/85111004779

U2 - 10.1016/j.wri.2021.100156

DO - 10.1016/j.wri.2021.100156

M3 - Article

AN - SCOPUS:85111004779

SN - 2212-3717

VL - 26

JO - Water Resources and Industry

JF - Water Resources and Industry

M1 - 100156

ER -

Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials

Abstrakti

Rahoitus

YK:n kestävän kehityksen tavoitteet

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Projektit

NoWASTE: Uudenlainen arvometallien talteenotto sivuvirroista

Siteeraa tätä