An arduino based smart hand gloves for load control and physician notification

Md Abdullah Al Rakib; Md Sadad Mahamud; Md Saniat Rahman Zishan; Fysol Ibna Abbas

doi:10.1109/ACMI53878.2021.9528260

An arduino based smart hand gloves for load control and physician notification

Md Abdullah Al Rakib
, Md Sadad Mahamud
, Md Saniat Rahman Zishan
, Fysol Ibna Abbas

Ei julkaistu Aalto-yliopiston affiliaatiolla

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

5 Sitaatiot (Scopus)

Abstrakti

Spinal cord trauma and strokes are the main causes of paralysis. In this research, a new idea has been developed by designing a smart glove. This glove can be used by the parallelized person to interact with other people by giving a symbol through this wearable glove. The principal objective of this research is to identify finger position of a person and give an emergency command to the nurse or doctor about the patient condition. In addition to that patient also can control loads of a certain room by moving fingers. This smart device consists of a glove with flex sensors and an electrical conditioning circuit. It bends with the finger and leads to selective regulation. The emphasis of this paper is on the exploration and implementation of a finger position measurement system for one hand. Moreover, it can be used for therapy and here medicinal application has been concentrated which shows the intimacy between the patient, doctor, and nurse.

Alkuperäiskieli	Englanti
Otsikko	2021 International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI 2021
Kustantaja	IEEE
ISBN (elektroninen)	978-1-6654-3843-8
DOI - pysyväislinkit	https://doi.org/10.1109/ACMI53878.2021.9528260
Tila	Julkaistu - 8 heinäk. 2021
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Automation, Control and Mechatronics for Industry 4.0 - Rajshahi, Bangladesh Kesto: 8 heinäk. 2021 → 9 heinäk. 2021

Conference

Conference	International Conference on Automation, Control and Mechatronics for Industry 4.0
Lyhennettä	ACMI
Maa/Alue	Bangladesh
Kaupunki	Rajshahi
Ajanjakso	08/07/2021 → 09/07/2021

YK:n kestävän kehityksen tavoitteet

Tämä tuotos edistää seuraavia kestävän kehityksen tavoitteita:

SDG 3 – Hyvä terveys ja hyvinvointi

Pääsy asiakirjaan

10.1109/ACMI53878.2021.9528260

Siteeraa tätä

@inproceedings{a71611c82ed64044bc5fbf43058b3b14,

title = "An arduino based smart hand gloves for load control and physician notification",

abstract = "Spinal cord trauma and strokes are the main causes of paralysis. In this research, a new idea has been developed by designing a smart glove. This glove can be used by the parallelized person to interact with other people by giving a symbol through this wearable glove. The principal objective of this research is to identify finger position of a person and give an emergency command to the nurse or doctor about the patient condition. In addition to that patient also can control loads of a certain room by moving fingers. This smart device consists of a glove with flex sensors and an electrical conditioning circuit. It bends with the finger and leads to selective regulation. The emphasis of this paper is on the exploration and implementation of a finger position measurement system for one hand. Moreover, it can be used for therapy and here medicinal application has been concentrated which shows the intimacy between the patient, doctor, and nurse.",

keywords = "Arduino nano, Bluetooth module, Flex Sensor, GSM module, Wireless Communication",

author = "\{Al Rakib\}, \{Md Abdullah\} and Mahamud, \{Md Sadad\} and Zishan, \{Md Saniat Rahman\} and Abbas, \{Fysol Ibna\}",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI ; Conference date: 08-07-2021 Through 09-07-2021",

year = "2021",

month = jul,

day = "8",

doi = "10.1109/ACMI53878.2021.9528260",

language = "English",

booktitle = "2021 International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI 2021",

publisher = "IEEE",

address = "United States",

}

Al Rakib, MA, Mahamud, MS, Zishan, MSR & Abbas, FI 2021, An arduino based smart hand gloves for load control and physician notification. julkaisussa 2021 International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI 2021. IEEE, International Conference on Automation, Control and Mechatronics for Industry 4.0, Rajshahi, Bangladesh, 08/07/2021. https://doi.org/10.1109/ACMI53878.2021.9528260

An arduino based smart hand gloves for load control and physician notification. / Al Rakib, Md Abdullah; Mahamud, Md Sadad; Zishan, Md Saniat Rahman et al.
2021 International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI 2021. IEEE, 2021.

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - An arduino based smart hand gloves for load control and physician notification

AU - Al Rakib, Md Abdullah

AU - Mahamud, Md Sadad

AU - Zishan, Md Saniat Rahman

AU - Abbas, Fysol Ibna

PY - 2021/7/8

Y1 - 2021/7/8

N2 - Spinal cord trauma and strokes are the main causes of paralysis. In this research, a new idea has been developed by designing a smart glove. This glove can be used by the parallelized person to interact with other people by giving a symbol through this wearable glove. The principal objective of this research is to identify finger position of a person and give an emergency command to the nurse or doctor about the patient condition. In addition to that patient also can control loads of a certain room by moving fingers. This smart device consists of a glove with flex sensors and an electrical conditioning circuit. It bends with the finger and leads to selective regulation. The emphasis of this paper is on the exploration and implementation of a finger position measurement system for one hand. Moreover, it can be used for therapy and here medicinal application has been concentrated which shows the intimacy between the patient, doctor, and nurse.

AB - Spinal cord trauma and strokes are the main causes of paralysis. In this research, a new idea has been developed by designing a smart glove. This glove can be used by the parallelized person to interact with other people by giving a symbol through this wearable glove. The principal objective of this research is to identify finger position of a person and give an emergency command to the nurse or doctor about the patient condition. In addition to that patient also can control loads of a certain room by moving fingers. This smart device consists of a glove with flex sensors and an electrical conditioning circuit. It bends with the finger and leads to selective regulation. The emphasis of this paper is on the exploration and implementation of a finger position measurement system for one hand. Moreover, it can be used for therapy and here medicinal application has been concentrated which shows the intimacy between the patient, doctor, and nurse.

KW - Arduino nano

KW - Bluetooth module

KW - Flex Sensor

KW - GSM module

KW - Wireless Communication

U2 - 10.1109/ACMI53878.2021.9528260

DO - 10.1109/ACMI53878.2021.9528260

M3 - Conference article in proceedings

AN - SCOPUS:85115693627

BT - 2021 International Conference on Automation, Control and Mechatronics for Industry 4.0, ACMI 2021

PB - IEEE

T2 - International Conference on Automation, Control and Mechatronics for Industry 4.0

Y2 - 8 July 2021 through 9 July 2021

ER -

An arduino based smart hand gloves for load control and physician notification

Abstrakti

Conference

YK:n kestävän kehityksen tavoitteet

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä