Activation of TEMPO by ClO2 for oxidation of cellulose by hypochlorite — Fundamental and practical aspects of the catalytic system

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

Organisaatiot

  • UPM

Kuvaus

Bromide-free TEMPO-catalyzed oxidation of the primary alcohols by sodium hypochlorite (NaOCl) does not proceed without a prior activation of the catalyst. Here were demonstrate an immediate in situ activation of the catalyst with an equimolar addition of chlorine dioxide (ClO2) relative to TEMPO. Sodium bromide (NaBr) had a similar role in activating the catalyst although NaBr was needed in excess and the activation took several minutes depending on the dosage of NaBr. The activation method, or the concentration of NaBr, did not affect the bulk oxidation rate. The selectivity of the ClO2 initiated oxidation remained high up to NaOCl addition of 3 mol/kg bleached birch kraft pulp after which additional loss in yield and depolymerization of cellulose were emphasized with negligible increase in carboxylate content. A carboxylate content of 0.8–1 mol/kg, sufficient for easy mechanical fibrillation of the pulp, was achieved under mild conditions with NaOCl addition of 2-2.5 mol/kg pulp.

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut524-530
Sivumäärä7
JulkaisuCarbohydrate Polymers
Vuosikerta174
TilaJulkaistu - 30 kesäkuuta 2017
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Lataa tilasto

Ei tietoja saatavilla

ID: 14238406