A zero-crossing approximation of a distorted sinusoidal signal using analog circuit

Ferdi Perdana Kusumah; Jorma Kyyrä

doi:10.1109/IECON.2017.8216127

A zero-crossing approximation of a distorted sinusoidal signal using analog circuit

Ferdi Perdana Kusumah, Jorma Kyyrä

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

1 Sitaatiot (Scopus)

263 Lataukset (Pure)

Abstrakti

This paper proposes a method for zero-crossing approximation of a band-limited sinusoidal signal embedded by a white Gaussian noise-like distortion. It consists of passive low-pass filter and dynamic-hysteresis comparator circuits. Simplicity and wide dynamic range are the main goal of the proposed approach. Theoretical calculations were formulated to select proper circuit components values. Simulation and experimental results are then presented to show circuit performance and characteristics. The method approximates zero crossing within a certain boundary of small phase-shifts around the crossing signal. It utilized over a wide range of input amplitude and frequency variations.

Alkuperäiskieli	Englanti
Otsikko	Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017
Kustantaja	IEEE
Sivut	732-737
Sivumäärä	6
ISBN (elektroninen)	9781538611272
DOI - pysyväislinkit	https://doi.org/10.1109/IECON.2017.8216127
Tila	Julkaistu - 18 jouluk. 2017
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	Annual Conference of the IEEE Industrial Electronics Society - Beijing, Kiina Kesto: 29 lokak. 2017 → 1 marrask. 2017 Konferenssinumero: 43 http://iecon2017.csp.escience.cn/

Julkaisusarja

Nimi	Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
Kustantaja	IEEE
ISSN (painettu)	1553-572X

Conference

Conference	Annual Conference of the IEEE Industrial Electronics Society
Lyhennettä	IECON
Maa/Alue	Kiina
Kaupunki	Beijing
Ajanjakso	29/10/2017 → 01/11/2017
www-osoite	http://iecon2017.csp.escience.cn/

Pääsy asiakirjaan

10.1109/IECON.2017.8216127

ELEC_Kusumah_etal_A-Zero-Crossing-Approximation_IECON_2017Accepted author manuscript, 3,53 MB

A Three-Phase to Single-Phase Midpoint Matrix Converter Using a Free-wheeling Switch for an Inductive Power Transfer System
Jorma Kyyrä
29/07/2021
1 kohde/ Medianäkyvyys
Lehdistö/media: Esiintyminen mediassa

Siteeraa tätä

Kusumah, F. P., & Kyyrä, J. (2017). A zero-crossing approximation of a distorted sinusoidal signal using analog circuit. teoksessa Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017 (Sivut 732-737). (Proceedings of the Annual Conference of the IEEE Industrial Electronics Society). IEEE. https://doi.org/10.1109/IECON.2017.8216127

@inproceedings{322a08cc6a3b4fd79d9ba59e73815488,

title = "A zero-crossing approximation of a distorted sinusoidal signal using analog circuit",

abstract = "This paper proposes a method for zero-crossing approximation of a band-limited sinusoidal signal embedded by a white Gaussian noise-like distortion. It consists of passive low-pass filter and dynamic-hysteresis comparator circuits. Simplicity and wide dynamic range are the main goal of the proposed approach. Theoretical calculations were formulated to select proper circuit components values. Simulation and experimental results are then presented to show circuit performance and characteristics. The method approximates zero crossing within a certain boundary of small phase-shifts around the crossing signal. It utilized over a wide range of input amplitude and frequency variations.",

keywords = "DH-HEMTs, Hysteresis, Switches, Distortion, Mathematical model, Integrated circuit modeling, Harmonic analysis",

author = "Kusumah, {Ferdi Perdana} and Jorma Kyyr{\"a}",

year = "2017",

month = dec,

day = "18",

doi = "10.1109/IECON.2017.8216127",

language = "English",

series = "Proceedings of the Annual Conference of the IEEE Industrial Electronics Society",

publisher = "IEEE",

pages = "732--737",

booktitle = "Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017",

address = "United States",

note = "Annual Conference of the IEEE Industrial Electronics Society, IECON ; Conference date: 29-10-2017 Through 01-11-2017",

url = "http://iecon2017.csp.escience.cn/",

}

Kusumah, FP & Kyyrä, J 2017, A zero-crossing approximation of a distorted sinusoidal signal using analog circuit. julkaisussa Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017. Proceedings of the Annual Conference of the IEEE Industrial Electronics Society, IEEE, Sivut 732-737, Annual Conference of the IEEE Industrial Electronics Society, Beijing, Kiina, 29/10/2017. https://doi.org/10.1109/IECON.2017.8216127

A zero-crossing approximation of a distorted sinusoidal signal using analog circuit. / Kusumah, Ferdi Perdana; Kyyrä, Jorma.
Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017. IEEE, 2017. s. 732-737 (Proceedings of the Annual Conference of the IEEE Industrial Electronics Society).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - A zero-crossing approximation of a distorted sinusoidal signal using analog circuit

AU - Kusumah, Ferdi Perdana

AU - Kyyrä, Jorma

N1 - Conference code: 43

PY - 2017/12/18

Y1 - 2017/12/18

N2 - This paper proposes a method for zero-crossing approximation of a band-limited sinusoidal signal embedded by a white Gaussian noise-like distortion. It consists of passive low-pass filter and dynamic-hysteresis comparator circuits. Simplicity and wide dynamic range are the main goal of the proposed approach. Theoretical calculations were formulated to select proper circuit components values. Simulation and experimental results are then presented to show circuit performance and characteristics. The method approximates zero crossing within a certain boundary of small phase-shifts around the crossing signal. It utilized over a wide range of input amplitude and frequency variations.

AB - This paper proposes a method for zero-crossing approximation of a band-limited sinusoidal signal embedded by a white Gaussian noise-like distortion. It consists of passive low-pass filter and dynamic-hysteresis comparator circuits. Simplicity and wide dynamic range are the main goal of the proposed approach. Theoretical calculations were formulated to select proper circuit components values. Simulation and experimental results are then presented to show circuit performance and characteristics. The method approximates zero crossing within a certain boundary of small phase-shifts around the crossing signal. It utilized over a wide range of input amplitude and frequency variations.

KW - DH-HEMTs

KW - Hysteresis

KW - Switches

KW - Distortion

KW - Mathematical model

KW - Integrated circuit modeling

KW - Harmonic analysis

U2 - 10.1109/IECON.2017.8216127

DO - 10.1109/IECON.2017.8216127

M3 - Conference article in proceedings

T3 - Proceedings of the Annual Conference of the IEEE Industrial Electronics Society

SP - 732

EP - 737

BT - Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017

PB - IEEE

T2 - Annual Conference of the IEEE Industrial Electronics Society

Y2 - 29 October 2017 through 1 November 2017

ER -

A zero-crossing approximation of a distorted sinusoidal signal using analog circuit

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Sormenjälki

Lehtileikkeet

A Three-Phase to Single-Phase Midpoint Matrix Converter Using a Free-wheeling Switch for an Inductive Power Transfer System

Siteeraa tätä