A plug and produce-inspired approach in distributed control architecture: A flexible assembly line and product centric control example

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussaConference contributionScientificvertaisarvioitu

2 Sitaatiot (Scopus)

Abstrakti

There is an increasing trend of manufacturing new products in small lot sizes even though their specifications may not be known before the order actually arrives. This requires a high level of agility and in particular support on the software side. Thus, dynamic reconfiguration of controllers and appropriate communication paradigms that can adapt to the changing infrastructure on the factory floor are desirable. This paper presents work towards introducing a plug and produce-style approach, a paradigm where devices can be dynamically added, removed, or reconfigured on the factory floor. Our example is based on OPC UA on an assembly line with an IEC 61499-based environment to introduce flexibility, interoperability, and fault tolerance.

AlkuperäiskieliEnglanti
OtsikkoProceedings of the 2020 IEEE International Conference on Industrial Technology, ICIT 2020
KustantajaIEEE
Sivut271-277
Sivumäärä7
ISBN (elektroninen)9781728157542
DOI - pysyväislinkit
TilaJulkaistu - helmik. 2020
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisuussa
TapahtumaIEEE International Conference on Industrial Technology - Buenos Aires, Argentiina
Kesto: 26 helmik. 202028 helmik. 2020
Konferenssinumero: 21

Julkaisusarja

NimiIEEE international conference on industrial technology
KustantajaIEEE
Vuosikerta2020-February
ISSN (painettu)2641-0184
ISSN (elektroninen)2643-2978

Conference

ConferenceIEEE International Conference on Industrial Technology
LyhennettäICIT
Maa/AlueArgentiina
KaupunkiBuenos Aires
Ajanjakso26/02/202028/02/2020

Sormenjälki

Sukella tutkimusaiheisiin 'A plug and produce-inspired approach in distributed control architecture: A flexible assembly line and product centric control example'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä